Abstract:Although high-speed powder spreading can efficiently enhance the productivity of laser powder bed fusion (LPBF) additive manufacturing, it is rarely used because it is generally believed to be unfavourable for the part quality. However, there is no systematic investigation to confirm this "common sense". In this work, a series of powder spreading and melting experiments are carried out to investigate the role of the spreading speed in LPBF. In the single-layer experiments, the high-speed powder spreading indeed reduces the packing density of the powder layer and seems unfavourable as expected. However, the multilayer LPBF processes of cubic samples with various high powder-spreading speeds are successful, and the samples possess even fewer defects and thus better mechanical properties particularly fatigue life, which is counterintuitive and has never been reported before. To understand the physical mechanisms, we fabricate staircase samples under different powder spreading speeds, revealing the layer-by-layer evolution of the powder bed and deposited dense region. It is found that regardless of the powder spreading speed, the actual powder layer thickness gradually increases due to the shrinkage during powder melting, but always reaches the steady state in ∼10 layers, where the deposited dense layer thickness is equal to the nominal powder layer thickness, thereby achieving similar melting condition and quality. Furthermore, LPBF experiments with intended operational delays in the powder spreading procedure are conducted and prove our speculation that the slightly reduced pores and cracks in the samples fabricated with high-speed powder spreading are mainly attribute to the reduced cooling time between layers and consequently the higher temperature before next-layer melting as well as lower temperature gradients. The major drawback with the higher powder spreading speed is also discussed, which is the reduction of the dimensional accuracy of the fabricated sample along the building direction. This study provides unprecedented insight into the role of powder spreading speed in LPBF and corrects the inaccurate intuition that high-speed powder spreading is always unfavourable, which provides more potential solutions to enhance the productivity and part quality of LPBF.

Powder spreading in laser-powder bed fusion process

The influence of material properties and process parameters on the spreading process in additive manufacturing

Accelerating Laser Powder Bed Fusion: The Influence of Roller-Spreading Speed on Powder Spreading Performance

Is high-speed powder spreading really unfavourable for the part quality of laser powder bed fusion additive manufacturing?

Influences of powder morphology and spreading parameters on the powder bed topography uniformity in powder bed fusion metal additive manufacturing

Powder movement rules of laser powder bed fusion additive manufacturing aluminum alloy based on discrete element method

Powder-spreading dynamics and packing quality improvement for laser powder bed fusion additive manufacturing

Laser Powder Bed Fusion of Powder Material: A Review

Laser powder bed fusion recoater selection guide—Comparison of resulting powder bed properties and part quality

Experimental approach for development of a powder spreading metric in additive manufacturing

Effect of Powder Variability on Laser Powder Bed Fusion Processing and Properties of 316L

The interplay between vapour, liquid, and solid phases in laser powder bed fusion

Influence of spattering on in-process layer surface roughness during laser powder bed fusion

Effects of spreader geometry on powder spreading process in powder bed additive manufacturing

A Review on Laser Beam Shaping Application in Laser Powder Bed Fusion

Powder deposition mechanism during powder spreading with different spreader geometries in powder bed fusion additive manufacturing

Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy

Quantitative analysis of thin metal powder layers via transmission X-ray imaging and discrete element simulation: Blade-based spreading approaches

In-situ observation of powder spreading in powder bed fusion metal additive manufacturing process using particle image velocimetry

Laser powder bed fusion processing of plasma atomized AlSi10Mg powder: Surface roughness and mechanical properties modification

Effect of particle surface roughness on the flowability and spreadability of Haynes 230 powder during laser powder bed fusion process