Abstract:Thiophene (C 4 H 4 S) removal from coke oven gas is critical to its subsequent high valuable utilization but remains a challenge. MOF-199 was considered as a promising candidate for C 4 H 4 S adsorption removal owing to its nature of enriched opened Cu sites. However, the presence of mixed valence of Cu(II) and Cu(I) in MOF-199 makes it puzzling to their respective contribution to the removal of C 4 H 4 S. Herein, a series of MOF-199 with different Cu(I) contents were synthesized using different methods, including hydrothermal, solution diffusion, and ultrasonic, and their C 4 H 4 S adsorption performance were investigated. The respective contributions of Cu(II) and Cu(I) to the C 4 H 4 S removal was systematically discussed. The collected results indicated that although the samples prepared with different methods present a remarkable difference in textural characters, the latter was found to have a negligible influence on the C 4 H 4 S removal owing to MOF-199(H) affording an inferior surface area and pore volumes but performing the best C 4 H 4 S removal capacity of 53.7 mg S/g. The co-adsorption results of CH 3 SCH 3 and C 4 H 4 S indicated that the excellent performance of MOF-199(H) mainly attributed to the presence of Cu(I), which provides active sites for C 4 H 4 S adsorption through π complex coordination. Cu(II) species was also found to the C 4 H 4 S adsorption via soft-acid-base coordinated interaction, but its contribution is 8.3 mg S/g, only accounting for 15.5 %. Additionally, the adsorption of C 4 H 4 S on MOF-199(H) was found to follow the intra-particle diffusion model and the Langmuir models. Moreover, MOF-199(H) also exhibited an excellent regeneration performance due to the weak interaction between C 4 H 4 S and their opened Cu sites, the C 4 H 4 S adsorption capacity still reaches 50.6 mg S/g after three regeneration cycles, about 94 % of its initial value. The results collected in this study will provide new insights for the manipulation of performance of C 4 H 4 S adsorption on the MOF-199.

From MOF-199 Microrods to CuO Nanoparticles for Room-Temperature Desulfurization: Regeneration and Repurposing Spent Adsorbents as Sustainable Approaches

Fabrication of Zn-MOF/ZnO nanocomposites for room temperature H2S removal: Adsorption, regeneration, and mechanism

Synthesis of Highly Ordered Nanorod Arrays 9mn1cemos and Character of High Sulfur Capacity for Hot Coal Gas Desulfurization

Regeneration strategies for metal–organic frameworks post acidic gas capture

Trace Flue Gas Contaminants Poison Coordinatively Unsaturated Metal–Organic Frameworks: Implications for CO2Adsorption and Separation

Controlled Synthesis of Metal-Organic Frameworks in Scalable Open-Porous Contactor for Maximizing Carbon Capture Efficiency

Revealing the contribution of Cu(II) and Cu(I) inherent in MOF-199 for efficient thiophene removal at room temperature

Porous metal–organic frameworks as emerging sorbents for clean air

Degradation of sulfamerazine by a novel CuxO@C composite derived from Cu-MOFs under air aeration

Sulfur-functionalized metal-organic frameworks: Synthesis and applications as advanced adsorbents

Recent advances in MOF-derived carbon-based nanomaterials for environmental applications in adsorption and catalytic degradation

Ultralow loading of Cu2O/CuO nanoparticles on metal-organic framework-derived carbon octahedra and activated semi-coke for highly efficient SO2 removal

Metal-organic framework-based materials for the abatement of air pollution and decontamination of wastewater

MOF-5@Ni derived ZnO@Ni3ZnC0.7/PMS system for organic matter removal: A thorough understanding of the adsorption−degradation process

Functionally decorated metal–organic frameworks in environmental remediation

Correction to “Water-Based Synthesis of a Stable Iron-Based Metal–Organic Framework for Capturing Toxic Gases”

MIL-53(Fe) derived magnetic CuFe2O4/Fe2O3 composite for catalytic oxidation of sulfamethoxazole via peroxymonsulfate activation

Adsorption of toxic gases by metal-organic frameworks

Nitrogen oxide remediation through metal–organic frameworks with bi-functional absorption and photocatalytic characteristics

Surface, Interface and Structure Optimization of Metal‐Organic Frameworks: Towards Efficient Resourceful Conversion of Industrial Waste Gases

MOF Derived Co−Fe nitrogen doped graphite carbon@crosslinked magnetic chitosan Micro−nanoreactor for environmental applications: Synergy enhancement effect of adsorption−PMS activation