Abstract:The launch and recovery (L&R) of a small vessel from a large mothership occurs in various settings, such as the rescue of stranded personnel, extraction of unmanned autonomous sea monitoring sensors and the deployment of rescue submersibles. L&R of a small vessel, from a large mothership, at high sea states is difficult and is often avoided for safety reasons. This paper proposes sliding mode controllers to automate the process involving a modified davit crane in which the suspension point is movable. This is the first time a robust control strategy has been used to tackle this specific maritime problem. In this work, a second-order sliding mode controller is used to change the length of the cable during the recovery process and ensures that a pre-defined profile for the cable's length is followed. This controller alone proves to be sufficient for a safe recovery at low sea states. However, for higher sea states, the small vessel and mothership collide under certain circumstances. An integral sliding mode controller is introduced to adjust the crane's boom, which modifies the position of the suspension point, such that the oscillations of the small vessel are minimized. This controller aims to keep the distance between the mothership's hull and the centre of the small vessel at a constant value by adjusting the position of the crane's boom and reducing the swing angle. The overall control algorithm is found to be very effective, compared to the fixed boom case, ensuring that collisions do not occur under any of the tested configurations, and a safe distance is maintained between the mothership and the small vessel. The performance evaluation of the controller predicts that it will safely operate in rough sea states for any initial combination of swing angle and velocity, if a safe recovery can be carried out at a lower sea state for the same initial conditions.

Hierarchical NMPC–ISMC of active heave motion compensation system for TMS–ROV recovery

Robust Dynamic Positioning of Autonomous Surface Vessels with Tube-Based Model Predictive Control

Nonlinear control of active heave compensator for an underwater towed system

Nonlinear Control for an Active-passive Hybrid Compensation System

Features of Dynamism Wharf-Cable-Dynamic-Positioning Vessel Rigid-Flexible Coupling Multi-Body System Analysis

A Pressure-Displacement Control for an Active-Passive Hybrid Compensation System

PREDICTIVE ROBUST CONTROL BASED ON HIGHER-ORDER SLIDING MODE FOR PASSIVE HEAVE COMPENSATOR WITH HYDRAULIC TRANSFORMER

State Constrained Variable Structure Control for Active Heave Compensators.

ROV recovery with wave-motion compensation using model predictive control

Nonlinear Robust Prediction Control of Hybrid Active–Passive Heave Compensator With Extended Disturbance Observer

A Model Predictive Control Approach for USV Autonomous Cruising Via Disturbance Learning

Cascade NMPC-PID control strategy of active heave compensation system for ship-mounted offshore crane

Synchronize the Parafoil and the Vessel: A Hierarchical Distributed Nonlinear Model Predictive Control Approach

Research on motion control of the semi-submersible platform under the mooring line failure

Analysis of the Dynamic Response of ROV System Experiencing Vessel Motion During Deployment and Recovery Processes

Dynamic modelling and analysis of 3-axis motion compensated offshore cranes

This is the Way: Mitigating the Roll of an Autonomous Uncrewed Surface Vessel in Wavy Conditions Using Model Predictive Control

Control of the launch and recovery of small boats to a mothership in high sea states using sliding mode methods

Parafoil System Cooperative Recovery: A Coordinated Distributed NMPC Approach

Virtual prototype modeling and fuzzy control of the heave compensation system for a 500-ton deep-sea mining vessel

Scale model test of a semi-active heave compensation system for deep-sea tethered ROVs