Abstract:Abstract A real industrial electroplating rinsing wastewater was collected and subjected to physical and chemical examination. The study showed that it can be categorized as high strength wastewater, at pH- 2, COD 1430 mg/l, and high level of metals above permissible limits, namely: 150, 30, 25, and 2.9 for Ni, Cu, Zn, and Fe mg/l respectively. Therefore, metals must be adequately removed before discharging to avoid any hazardous impact on the environment. Similar synthetic wastewater was prepared to study the effect of chemical coagulation for the precipitation of metals. The optimum removal rate was achieved by using a combination of lime and ferric chloride at 100 and 30 mg/l respectively. The chemically treated electroplating wastewater was subjected to an electrocoagulation study. A comparison between iron and stainless-steel electrodes for the removal of metals was investigated. Furthermore, the effect of different electric voltages, and contact time on metals removal efficiency were also examined. It was found that the optimum removal capacity was achieved when a stainless steel electrode was employed in the presence of ferric chloride as coagulant, at 10 volts, 30 min. contact time, and pH 9 for synthetic solution. In a batch treatment system, the real industrial wastewater was treated at the predetermined optimum operating conditions; the removal of metals was 92.1%, 87.8% and 82.9% for Ni. Zn, and Cu respectively. By employing a continuous flow reactor for the treatment of the same real wastewater and under the same operating conditions, metals removal rate increased to 98.9%, 97.4% and 96.6% for Ni. Zn, and Cu respectively. The level of metals in the final treated wastewater copes with Egyptian Environmental Regulation. The overall results confirmed that the electro-coagulation (EC) technology offers an effective alternative process in combination with the conventional chemical coagulation process for reaching high removal performance of toxic metals from the electroplating wastewater. The advantage of EC technique is achieving high treatment efficiency instead of expensive chemical reagents, high construction cost and/or other conventional processes. In addition, the final treated water can be reused for rinsing process in the electroplating industry and/or discharging without any environmental hazard effect. It is also recommended to employ solar energy instead of electricity to reduce cost of operation.

Electro- Flotation Treatment Technique (EFTT) of Some Industrial wastewater

ELECTROCOAGULATION/ELECTROFLOTATION OF REAL TEXTILE EFFLUENT: IMPROVEMENT OF THE PROCESS IN NONCONVENTIONAL PILOT EXTERNAL LOOP AIRLIFT REACTOR

Implications of advanced wastewater treatment: Electrocoagulation and electroflocculation of effluent discharged from a wastewater treatment plant

Treatment of industrial electroplating wastewater for metals removal via electrocoagulation continous flow reactors

Electrocoagulation process for oily wastewater treatment and optimization using response surface methodology

Electrocoagulation and Electroflotation of Restaurant Wastewater

Comparison of the Removal Efficiencies for Electro-Flotation and Electrocoagulation Wastewater Treatment Methods to Treat Effluents Discharged from Electroplating Industries

Pollutant Removal Efficiency of Electrocoagulation Method from Industrial Wastewater: Comparison with Other Treatment Methods and Key Operational Parameters—a Comparative Study Review

Treatment of oily wastewater by electrocoagulation technology: A general review (2018-2022)

The treatment of black-odorous water using tower bipolar electro-flocculation including the removal of phosphorus, turbidity, sulfion, and oxygen enrichment

Comparative study of electrochemical wastewater treatment processes for bilge water as oily wastewater: A kinetic approach

Pre-treatment of composite industrial wastewater by Fenton and electro-Fenton oxidation processes

Electrolysis-enhanced coagulation process for highly emulsified oily wastewater treatment: Floc diameter, oil removal performance and mechanism

The treatment of printing and packaging wastewater by electrocoagulation-flotation: the simultaneous efficacy of critical parameters and economics

Recent Applications of the Electrocoagulation Process on Agro-Based Industrial Wastewater: A Review

Removal of Chemical Oxygen Demand from Real Petroleum Refinery Wastewater through a Hybrid Approach: Electrocoagulation and Adsorption

Investigation of selected physico-chemical quality parameters in industrial wastewater by electrocoagulation process, Ethiopia

Computational fluid dynamic for improving design and performance of an external loop airlift reactor used in electrochemical wastewater treatment

Studying the effect of reactor design on the electrocoagulation treatment performance of oily wastewater

Treatment of Textile Wastewater from Spinning Mill Using Electrocoagulation-Flocculation Process

Improving electrocoagulation floatation for harvesting microalgae