Red-Emitting Phosphor Ca2MgSi2O7: Sm3+, Eu3+ for UV White Light-Emitting Diodes

Ayinuremu Tuerxun,Subiyinuer Jilili,Lei Wang,Aierken Sidike

DOI: https://doi.org/10.21203/rs.3.rs-944846/v1

2021-09-30

Abstract:Abstract In this research, a series of Ca 2 MgSi 2 O 7 : 2% Sm 3+ , x % Eu 3+ (x=4, 5, 6, 7, 8) red phosphors were synthesized using the high-temperature solid-phase method. The phase and luminescence properties of the samples were investigated using an X-ray diffractometer and a photoluminescence spectrometer. The results showed that the synthesized samples were of pure phase, and the introduction of small amounts of Sm 3+ and Eu 3+ had no significant impact on the crystal structure of the phosphors. It is observed from the phosphor spectra that the co-doped samples exhibited intense red-light emission corresponding to that of Eu 3+ at 613 nm when excited at the strongest excitation peak of Sm 3+ (401 nm); here, the emission peak intensity of Eu 3+ increased by a factor of 5.3. It is found that resonant nonradiative energy transfer occurs from Sm 3+ to Eu 3+ in the sample, and the energy transfer efficiency reaches up to 44%. The calculated critical distance for energy transfer is 16.117 Å and the concentration interrupt mechanism is an electric dipole-dipole (d-d) interaction. The color coordinates of the samples are all located in the red region (0.6319, 0.3676) with a color purity of ~ 89.3%. The samples exhibited thermal stability of up to 68.6% of that at room temperature when heated to 150 ̊C . The LED samples packaged with the phosphors emitted warm white-light with a color temperature (CCT) of 5553 K and a color rendering index ( R a ) of 84.8. The magnesium yellow feldspar silicate phosphor is suitable as the red component in white LED trichromatic phosphors and has potential applications in solid-state lighting.