Abstract:Open-cell metallic foams used as catalyst supports exhibit excellent transport properties. In this work, a unique application of metallic foam, as pelletized catalyst in a packed bed reactor, is examined. By using a wall-segment Computational Fluid Dynamics (CFD) setup, parametric analyses are carried out to investigate the influence of foam morphologies (cell size ϕ=0.45−3 mm and porosity ε=0.55−0.95) and intrinsic conductivity on flow and heat transport characteristics in a slender packed bed (N=D/dp=6.78) made of cylindrical metallic foam pellets. The transport processes have been modeled using an extended version of conventional particle-resolved CFD, i.e., flow and energy in inter-particle spaces are fully resolved, whereas the porous-media model is used for the effective transport processes inside highly-porous foam pellets. Simulation inputs include the processing parameters relevant to Steam Methane Reforming (SMR), analyzed for low (Rep~100) and high (Rep~5000) flow regimes. The effect of foam morphologies on packed beds has shown that the desired requirements contradict each other, i.e., an increase in cell size and porosity favors the reduction in pressure drop, but, it reduces the heat transfer efficiency. A design study is also conducted to find the optimum foam morphology of a cylindrical foam pellet at a higher Rep~5000, which yields ϕ = 0.45, ε = 0.8. Suitable correlations to predict the friction factor and the overall heat transfer coefficient in a foam-packed bed have been presented, which consider the effect of different foam morphologies over a range of particle Reynolds number, 100≤Rep≤5000.

Influence of the Foam Morphology on the Mechanical Behavior of Flow‐Through Foam Filters During Filtration Processes

Study and Modelling of Fluid Flow in Ceramic Foam Filters

Flow and fouling in elastic membrane filters with hierarchical branching pore morphology

Pore-scale computational analyses of non-Darcy flow through highly porous structures with various degrees of geometrical complexity

Flow and fouling in membrane filters: effects of membrane morphology

Experimental Characterization of the Mechanical Properties of Filter Media in Solid–Liquid Filtration Processes

Finite-element modelling of combined free/porous flow regimes: simulation of flow through pleated cartridge filters

Fluid dynamics in pleated membrane filter devices

Influence of Foam Morphology on Flow and Heat Transport in a Random Packed Bed with Metallic Foam Pellets-An Investigation Using CFD

Micromorphic FE$^2$ Simulation of Plastic Deformations of Foam Structures

Experimental and CFD analysis of fluid flow through nanofiber filter media

Analysis of the Macroscopic Behaviour of PMI Foam

Model-based performance analysis of pleated filters with non-woven layers

Effects of Pore Geometry on Flowing Foam Dynamics in 3D-Printed Porous Media

Flow and fouling in a pleated membrane filter

The role of fouling in optimizing direct-flow filtration module design

Strengthening of foamed composite materials

Optimizing the operation of a direct-flow filtration device

Ingredient-Wise Study of Flux Characteristics in the Ceramic Membrane Filtration of Uncontaminated Synthetic Metalworking Fluids, Part 2: Analysis of Underlying Mechanisms