Investigation of a new water-based cutting fluid for machining of titanium alloys

Ye Yang,Songshan Guo,Lina Si,Tengfei Liu,Yuanjing Dai,Chengzhi Yan,Chenhui Zhang

DOI: https://doi.org/10.1016/j.jmapro.2021.09.046

IF: 5.684

2021-11-01

Journal of Manufacturing Processes

Abstract:Titanium alloys are difficult-to-cut materials and difficult to be lubricated. In this paper, a new synthetic water-based cutting fluid for titanium alloys is developed. The main ingredients which contain polar groups are easy to adsorb on titanium alloy and form a stable boundary lubricant film. The lubricating and anti-wear properties of the developed cutting fluid were tested and the results show that the use of the developed cutting fluid leads to a low friction coefficient. Moreover, the machining performance of the developed cutting fluid was further tested through tapping, milling, and drilling. The tapping torque, machining force, tool wear, and machined surface roughness were used to evaluate the cutting fluid. It was found that the developed cutting fluid could decrease both the machining force and tool wear and get good surface quality owing to its good lubricating ability for titanium alloys.

engineering, manufacturing