Abstract:This paper introduces and describes the development and application of methodologies for the formulation of novel sustainable neat-oil metal removal fluids. A further paper will describe the methodologies being employed and the results of the performance benchmarking of the final fluid formulations for stainless steel and aerospace-grade titanium alloy materials. In this paper, a stepwise approach to the development of novel sustainable neat-oil metal removal formulations is described with a detailed discussion and analysis of the approach taken and the methodologies developed and applied. Two target applications were identified for cutting stainless steel and aerospace-grade titanium alloys. The key required properties of the fluids for these applications were combined with targets identified for cost, low temperature properties, kinetic viscosity (KV) and oxidative stability. Samples of base oils were obtained and characterised. The oils ranged from commodity commercial and specialist natural vegetable oils to chemically modified vegetable-oil-derived fatty acid esters and polyols. The selected oils were used to create blends which were screened for their key properties. From this work, four blends of base oils were identified for being taken forwards to the formulation screening stage. These blends represented a range of natural and modified oils blended in such a way as to achieve all of the required key properties of cost, KV, melt/pour points and oxidative stability. To determine if the oils were likely to also perform well as metal cutting fluids, they were subjected to a range of tests with and without the addition of certain additives, and their performances were benchmarked against a range of mineral oil and polyol-ester-based commercial fluids currently supplied to the target applications areas. The tests employed were: SRV, microtap and oxidation stability. The issues involved in the extrapolation of results from tribological testing to the prediction of fluid cutting performance are highlighted and discussed. From this work, one base oil blend for each of the two target applications was identified and the best performing mineral and polyol ester benchmark fluids were selected. Full-scale drilling and rigid torque tapping tests were used to refine formulations and to screen other additives identified in parallel microtap tests. The durability, oxidation stability, machine tool compatibility and misting potentials of the final formulations were also benchmarked using a range of standard and novel methodologies—this work will be described in a later paper.

Development and Physicochemical Properties of New Cutting Fluid for Titanium Alloy Machining

Investigation of a new water-based cutting fluid for machining of titanium alloys

Formulation of Sustainable Water-Based Cutting Fluids with Polyol Esters for Machining Titanium Alloys

Comparative Study on the Lubrication of Ti3C2TX MXene and Graphene Oxide Nanofluids for Titanium Alloys

Development of novel sustainable neat-oil metal working fluids for stainless steel and titanium alloy machining. Part 1. Formulation development

Lubricity and Adsorption of Castor Oil Sulfated Sodium Salt Emulsion Solution on Titanium Alloy

Sustainable Lubrication Methods for the Machining of Titanium Alloys: An Overview

Influence of Anionic Alkyl Chain on the Tribological Properties of Titanium Alloy under Water Lubrication: Experimental Analysis and Molecular Dynamics Simulations

An investigation into cutting fluid additives performance during machining processing of Ti-6Al-4V

Investigation of the Lubrication Performance of γ-Al<sub>2</sub>O<sub>3</sub>/ZnO Hybrid Nanofluids for Titanium Alloy

Thermophysical, tribological, and machinability characteristics of newly developed sustainable hybrid lubri-coolants for milling Ti-6Al-4V

Investigation of the Lubrication Performance of Γ-Al2o3/zno Hybrid Nanofluids for Titanium Alloy

High efficient co-doping in plasma electrolytic oxidation to obtain long-term self-lubrication on Ti6Al4V

Preparation and Properties of Superhydrophobic Titanium Alloy with Hierarchical Structure

Molecular structure insight into the tribological behavior of sulfonate ionic liquids as lubricants for titanium alloys

Study on Turning of Ti-6Al-4V with Water Steam as Coolant and Lubricant in Green Machining

Study on Cutting Processing Technology of Titanium Alloy

Role of intermediate phases on microstructures, wear and corrosion resistance in new-developed (α + β) titanium alloy

Nanostructured Superhydrophobic Titanium-Based Materials: A Novel Preparation Pathway to Attain Superhydrophobicity on TC4 Alloy

Advancing Machinability of Ti-6Al-4V Alloy: A Sustainable Integrated Approach

Preparation and Study on Fretting Tribological Behavior of Composite Lubrication Structure on the Titanium Alloy Surface