Abstract:Accurate information regarding the weight of vehicle loads plays a significant role in maintaining the structural health of bridges. However, the only method currently available for ascertaining the weight of loads is the bridge weigh-in-motion (BWIM) system, which is not widely used because of the high cost of the large device involved. There is therefore a need to develop an effective, low-cost technology to ascertain vehicle loads in relation to spatiotemporal load distribution on long-span bridges. This paper proposes a non-contact vehicle identification methodology to distinguish a vehicle from its load based on machine vision technology and deep learning algorithms. The vehicle information (i.e., type, weight, position, and motion trajectory, etc.) is conveniently obtained from a roadside monitoring surveillance camera, while the axle-weight distribution interval for nine classified vehicle types is obtained from the statistical information of 8,402 delivery vehicles from which the relationship between a unique vehicle type and the corresponding weight information is established. Meanwhile, a dataset containing 8,624 vehicle images was established for training the deep convolutional neural network (DCNN), where nine rough-grained vehicle classifications were contained in order to enhance the generalizability of the network. Optimization analysis was conducted to improve the network accuracy in vehicle types identification. The position of vehicles can also be effectively detected by a faster region-based convolutional neural network (Faster R-CNN), where the pre-trained DCNN with 98.17% vehicle types classification accuracy is employed as the co-shared network layer to enhance computation efficiency. Utilizing the object detection results from the Faster R-CNN and utilizing a Kalman filter, a vehicle in motion could also be simultaneously real-time tracked by the monitoring video, while a graphical user interface (GUI) incorporated into the video camera enabled automatic identification. A post-processing module has been established based on the proposed method, and a field test was conducted to validate the reliability of the system.

A camera calibration method for bridge live load identification using plane marks on the pavement

LiDAR-Camera Calibration under Arbitrary Configurations: Observability and Methods

A Long-focus Camera and Telemetry LiDAR Calibration for Rapid Transit Equipment.

Intrinsic and Extrinsic Calibration of Roadside LiDAR and Camera

AI-based Modeling and Data-Driven Identification of Moving Load on Continuous Beams

Computer Vision-Based Real-Time Identification of Vehicle Loads for Structural Health Monitoring of Bridges

A bridge dynamic response analysis and load recognition method using traffic imaging

Computer Vision-Based Pier Settlement Displacement Measurement of a Multispan Continuous Concrete Highway Bridge under Complex Construction Environments

A Novel Vision-Based Framework for Identifying Dynamic Vehicle Loads on Long-Span Bridges: A Case Study of Jiangyin Bridge, China

An Efficient and Practical Calibration Method for Roadside Camera Using Two Vanishing Points

Identification of spatio‐temporal distribution of vehicle loads on long‐span bridges using computer vision technology

Static and dynamic vehicle load identification with lane detection from measured bridge acceleration and inclination responses

Automated Static Camera Calibration with Intelligent Vehicles

A spatiotemporal distribution identification method of vehicle weights on bridges by integrating traffic video and toll station data

A bridge weigh-in-motion method of motorway bridges considering random traffic flow based on long-gauge fibre Bragg grating sensors

Automatic Calibration Method for PTZ Camera

Vehicle weight identification system for spatiotemporal load distribution on bridges based on non-contact machine vision technology and deep learning algorithms

Single-Camera-Based Bridge Structural Displacement Measurement with Traffic Counting

Bayesian Vehicle Load Estimation, Vehicle Position Tracking, and Structural Identification for Bridges with Strain Measurement

Toward Planet-Wide Traffic Camera Calibration

An Efficient Methodology for Calibrating Traffic Flow Models Based on Bisection Analysis