Abstract:In the present study, desilication of high-silica H-[B]-ZSM-5 zeolite was performed via alkali treatment. The optimization of three effective desilication factors, namely the NaOH concentration, treatment time, and temperature, while considering the potential interactions, was innovatively performed using response surface methodology via a three-level central composite design for methanol-to-propylene (MTP) process. By designing statistical models, we predicted high selectivity for propylene and high mesopore volume. Using different techniques, the attributes of catalysts were examined, and performance of all samples was assessed in MTP reaction. This reaction was carried out in a fixed-bed reactor at 480 °C and a methanol weight hourly space velocity of 0.9 h −1 . According to acquired data, the concentration of NaOH solution demonstrates a superior influence on propylene selectivity and the generation of mesopores in comparison with other two factors. Regression analysis demonstrated that the obtained data presented a good fit with predicted quadratic model, with R 2 and R 2 adj correlation coefficients of 0.996 and 0.983 for propylene selectivity, respectively. The maximum propylene selectivity was obtained as 48.8%, on H-[B]-ZSM-5 zeolite modified by 0.22 M NaOH at 68 °C for 45 min as the optimum conditions. For the optimal catalyst, an 867-h lifetime for the MTP conversion reaction was obtained in comparison with micropore H-[B]-ZSM-5 (high-silica boron-modified H-ZSM-5) catalyst (498 h). The average sedimentation rate of coke on catalysts was characterized using thermal gravimetric analysis and Brunauer–Emmett–Teller methods. A decrease in the coking rate and an increase in coke capacity of optimum desilicated sample were observed.

Ethylene production via ethanol dehydration over desilicated ZSM-5 catalyst

Ethanol Dehydration to Ethylene over HZSM-5 Catalyst Modified by Zn and Mn

Bioethanol Dehydration To Bioethylene With Modified Zn/Mn/Zsm-5 Catalyst

Low-Temperature Dehydration of Ethanol to Ethylene over Cu–Zeolite Catalysts Synthesized from Cu–Tetraethylenepentamine

Dehydration of Diluted Ethanol to Ethylene on Binder-Free HZSM-5 Zeolite Catalyst

Fine‐tuning texture of highly acidic HZSM‐5 zeolite for efficient ethanol dehydration

Tuning the Acid Nature of the ZSM-5 Surface for Selective Production of Ethylene from Ethanol at Low Temperatures

Industrial crude bioethanol dehydration to ethylene: Doping ZSM-5 to enhance selectivity and stability

Deactivation and Regeneration of ZSM-5 Zeolite Catalysts for Ethanol Dehydration

Coking Behavior of Submicron ZSM-5 Zeolite Catalyst in Dehydration of Ethanol to Ethylene

Selective dehydration of bio-ethanol to ethylene catalyzed by lanthanum-phosphorous-modified HZSM-5: influence of the fusel

Optimization of Ethylene Production from Ethanol Dehydration Using Zn-Mn-Co/HZSM-5 by Response Surface Methodology

Regulating Surface Acid-Base Balance on NaZSM-5 by Fe Modification Towards Enhanced Methanol Dehydration to Dimethyl Ether

Aromatization of Ethanol Over Desilicated ZSM-5 Zeolites: Effect of Pore Size in the Mesoporous Region

Preparation of hierarchical H-[B]-ZSM-5 zeolites by a desilication method as a highly selective catalyst for conversion of methanol to propylene

Production of Olefins and Propylene from Ethanol by Zr-Modified H-ZSM-5 Zeolite Catalysts

Facile synthesis of hierarchical H-[B]-ZSM-5 aggregates via design-optimized desilication for enhanced methanol-to-propylene conversion

Catalytic dehydration of ethanol-to-ethylene over Rho zeolite under mild reaction conditions

Development status of ethylene production by catalytic dehydration of fermented alcohol

Nanocrystalline H‐RTH Zeolite: An Efficient Catalyst for the Low‐Temperature Dehydration of Ethanol to Ethene

ZSM-5 molecular sieve modified catalyst and its preparation method and application