Abstract:The relatively low specific capacitance of flexible carbons hinders their practical application for fabricating high-performance flexible supercapacitors. In this work, a surface engineering method is proposed to boost the supercapacitive performance of the flexible carbon. In this method, a flexible carbon was fabricated from carbon felt via co-activation with potassium argininate and potassium hydroxide (KOH) as activators, and the resulting material is abbreviated as AKCF. Unlike traditional KOH activation processes, the addition of potassium argininate can produce a micro-graphitized carbon layer to be the outer layer of AKCF fibers for achieving better electronic transfer. Due to the improved conductivity and lower charge transfer resistance endowed by a thin micro-graphitized carbon layer, the capacitance of the AKCF-0.1 (0.1 M arginine was used) electrode obtained by the co-activation process is elevated to a 1.8-fold higher value of 403 C.g(-1) (2583 mC.cmz) relative to the AKCF-0 (0 M arginine was used) electrode prepared by KOH activation alone (222 C.g(-1) or 1369 mC.cmz). Moreover, this AKCF-0.1 electrode also displays satisfactory rate capability (66% capacitance retention after a 20-fold current increase) and highly stable cycling performance (no capacitance decline after 20,000 cycles). In addition, the asymmetric supercapacitors constructed with this AKCF-0.1 electrode as the flexible negative electrode expresses high energy densities of 68.4 Wh.kg(-1) and 0.139 mWh.cm(-2) in aqueous and gel electrolytes, respectively. (C) 2021 Elsevier Inc. All rights reserved.

Carbon-Based Supercapacitors Produced by Activation of Graphene

Mn0.5co2.5o4 Nanofibers Sandwiched in Graphene Sheets for Efficient Supercapacitor Electrode Materials

Control of Nano Grains and Wide Carbocyclic Layer Space of Forming Active Carbon with Extraordinary Capacitance Characteristics in Supercapacitors

Boosting Supercapacitive Performance of Flexible Carbon Via Surface Engineering.

Supercapacitors: Packing Activated Carbons into Dense Graphene Network by Capillarity for High Volumetric Performance Supercapacitors (Adv. Sci. 14/2019)

High-Performance Supercapacitors Based on Graphene/Activated Carbon Hybrid Electrodes Prepared Via Dry Processing

Activation Mechanism Study of Dandelion-Like Co9s8 Nanotubes in Supercapacitors

Supercapacitors: A Hierarchical Carbon Derived from Sponge-Templated Activation of Graphene Oxide for High-Performance Supercapacitor Electrodes (adv. Mater. 26/2016).

Preparation and Application of Graphene and Derived Carbon Materials in Supercapacitors: A Review

Packing Activated Carbons into Dense Graphene Network by Capillarity for High Volumetric Performance Supercapacitors

Activated Biomass-derived Graphene-based Carbons for Supercapacitors with High Energy and Power Density

Scalable Self-Propagating High-Temperature Synthesis Of Graphene For Supercapacitors With Superior Power Density And Cyclic Stability

Enhanced electrochemical performance of porous activated carbon by forming composite with graphene as high-performance supercapacitor electrode material

Scalable combustion synthesis of graphene-welded activated carbon for high-performance supercapacitors

Performance-Enhanced Activated Carbon Electrodes for Supercapacitors Combining Both Graphene-Modified Current Collectors and Graphene Conductive Additive

Fast Activation of Graphene with a Highly Distorted Surface and Its Role in Improved Aqueous Electrochemical Capacitors

Fast Activation of Graphene with Corrugated Surface and its Role in Improved Aqueous Electrochemical Capacitors

Nanohole-created carbon nanofibers for graphene-based supercapacitors

Boosting Supercapacitor Performance of Carbon Fibres Using Electrochemically Reduced Graphene Oxide Additives

Surface Modification by Graphene Oxide: an Efficient Strategy to Improve the Performance of Activated Carbon Based Supercapacitors

Scalable Preparation of Hierarchical Porous Activated Carbon/graphene Composites for High-Performance Supercapacitors