Abstract:In these papers, the computational fluid dynamics technique is used to simulation a Hollow fiber membrane contactor to absorb carbon dioxide from the air by absorbing Mono-ethanol amine. The governing equations of this process include the equations of continuity, momentum and mass transfer in areas related to the shell membrane and tube and taking into account the relevant boundary conditions and assumptions, using the software COMSOL were solved. By examining and comparing the results with experimental data presented in the papers, the accuracy of simulation results was confirmed. The influence of important parameters in the process including wetness of membrane, the volumetric flow rate of gas, liquid volumetric flow rate and temperature effects were studied. The results showed that by increasing the volumetric flow rate of liquid absorption 73–83, the mass transfer rate of carbon dioxide to absorption increases because of the carbon dioxide concentration gradient in the gas phase and liquid increases. Because of the reduced residence time 86 to 20 in the membrane contact, by increasing the volumetric flow rate of gas the amount of removed CO2 in contact reduced so that by increasing the gas flow rate 0.6–1.4, the CO2 removal rate will be only 18 % decreased. The CO2 concentration is decreased along the tube since it penetrates the tube where the highest concentration of carbon dioxide is in the contact surface of the membrane and absorbent solution. In doing so, due to the reactions done in the tube between Carbon dioxide and Monoethanolamine, the CO2 concentration is decreased and reaches zero at the center of the tube. The other factors are the solvent temperature and wetness. With increasing the absorption solvent temperature, carbon dioxide removal efficiency is significantly increased. Wettability has a strong negative effect on the efficiency of the membrane contactor. So with increase wettability, the efficiency of the membrane suddenly finds a sharp decrease. In some cases with increased wettability efficiency is close to zero.

Modeling and simulation of CO2 removal from power plant flue gas by PG solution in a hollow fiber membrane contactor

Study on Co2 Removal in Air by Hydrogel Membranes

Mass Transfer Process of Co2 Absorption Through Non-Porous Hollow Fibre Contactor

Modeling and Simulation of the Simultaneous Absorption/Stripping of CO2 with Potassium Glycinate Solution in Membrane Contactor

A Comprehensive Parametric Study on CO2 Removal from Natural Gas by Hollow Fiber Membrane Contactor: A Computational Fluid Dynamics Approach

Experimental Study on the Separation of CO2 from Flue Gas Using Hollow Fiber Membrane Contactors Without Wetting

Modeling and Simulation of the Impact of Feed Gas Perturbation on CO2 Removal in a Polymeric Hollow Fiber Membrane

Numerical investigation of the effects of polypropylene hollow fibre membrane structure on the performance of CO2 removal from flue gas

CFD Analysis of CO2 Sequestration Applying Different Absorbents Inside the Microporous PVDF Hollow Fiber Membrane Contactor

Modeling and simulation absorption of CO2 using hollow fiber membranes (HFM) with mono-ethanol amine with computational fluid dynamics

Modeling of CO2 Mass Transport Across a Hollow Fiber Membrane Reactor Filled with Immobilized Enzyme

Removal of CO2 from Simulated Flue Gas of Power Plants by Membrane-Based Gas Absorption Processes

Numerical Simulation And Analysis Of Co2 Removal In A Polypropylene Hollow Fiber Membrane Contactor

Numerical Study on Absorption of Carbon Dioxide and Mass Transfer Performance in Hollow Fiber Membrane Contactor

Investigation of CO2 Absorption in Methyldiethanolamine and 2-(1-piperazinyl)-ethylamine Using Hollow Fiber Membrane Contactors: Part C. Effect of Operating Variables

Experimental studies on simultaneous removal of CO2 and SO2 in a polypropylene hollow fiber membrane contactor

Analysis Of Co2 Capture From Power-Plant Flue Gas Using The Membrane Gas Absorption (Mga) Method

Experimental study on the absorption of CO 2 from flue gas by aqueous solutions of methyldiethanolamine + potassium glycinate in hollow fiber membrane contactor

Simulation Assessment of Inlet Parameters and Membrane-Surface-Structure Effects on CO2 Absorption Flux in Membrane Contactors

Theoretical investigations on the effect of absorbent type on carbon dioxide capture in hollow-fiber membrane contactors

Simulation on the Structure Effects of Hollow Fiber Membrane on CO 2 Removal from Flue Gas