Abstract:This paper presents a one-dimensional homogenous model of high power-density XeCl excilamp pumped by dielectric barrier discharge (DBD) with larger discharge gap and lower Cl 2 density in Xe/Cl 2 mixture, to research the electrical and chemical discharge characteristics leading to the production of XeCl* molecules for the optimal discharge parameters. The peaked wavelength 308 nm from the emission band of XeCl* exciplex molecules, show great promise as photochemotherapy for biomedicine applications. The temporal evolutions of the plasma voltage, current density and the species densities have been analyzed. The model validity has been checked by comparing with the experimental results. It is shown that the XeCl excilamp is a capacitive discharge during the entire voltage cycle and the accumulation of charge deposited in the dielectric surfaces play an extreme role in promoting the extinction of this discharge and the generation of next discharge. The UV radiant efficiency of the DBD XeCl excilamp depends on effect of the discharge behavior on the amplitude of the applied voltage, the total gas pressure, and the Cl2 density. XeCl excilamp has an optimized pressure around 150 mbar with the maximum radiant efficiency of 8.5% for 308 nm from XeCl* molecules and 1.3% for 172 nm from Xe 2 * molecules. According to the corrected simulation, the radiant efficiency of the optimum pressure is 6.0% for XeCl*molecules. Cl2 density in DBD-based XeCl excilamp strongly influence the balance of electron production and loss due to the dominant dissociative attachment process of electrons to Cl 2 molecules, which have significant dependence on the UV light output efficiency. It is demonstrated that the highest XeCl* density occurs near the dielectric during the current pulse. Therefore, electrical and radiant characteristics of XeCl excilamps can be considered as the basis to design the high power-density exciplex lamps in practical applications.

XeBr excilamp based on a non-toxic component mixture

Numerical Simulations on a Nanosecond-Pulse Exciplex Pumped Cesium Vapor Laser

The Ultraviolet-B Radiation Characteristics of Planar Excilamps Filled with Gas Mixture of Xenon, Bromine and Chlorine

Theoretical kinetics with one-dimensional fluid model and experimental investigation on coaxial XeCl excilamps

Efficient Light Emitters in the Solid State: Synthesis, Aggregation‐Induced Emission, Electroluminescence, and Sensory Properties of Luminogens with Benzene Cores and Multiple Triarylvinyl Peripherals

Radiant Characteristics of High Power Excilamps with Binary Exciplexes of XeCl and XeBr

Microdischarge Process and Vacuum Ultraviolet Emission Properties of Dielectric-Barrier-Discharge-Type Flat Fluorescent Lamps

Radiation characteristics of coaxial KrBr* excilamps based on a dielectric barrier discharge

Radiant Efficiency of Coaxial KrBr* Excilamps with High Power Density

The Efficiency of Coaxial Krcl* Excilamps

UV Emission of Excimer XeCl* Excited in Dielectric Barrier Discharge by Using Pulse Power Supply

Effect of Frequency on Emission of XeI* Excimer in a Pulsed Dielectric Barrier Discharge

Study of Xenon Discharges for 147 Nm Emission

Krbr Excilamp by Mw-Driven Used for Wastewater Advanced Treatment

Halogenated Thermally Activated Delayed Fluorescence Materials for Efficient Scintillation

Small Scale Emitter for an Excilamp with the Wavelength of 126 nm

Afterglow Spectra of Cl2/Xe Mixtures Pumped by XeCl Laser Radiation

Extrinsic Self‐Trapped‐Exciton Emission in Cs5Cu3Cl6I2 for Efficient X‐Ray Scintillation

Characteristics of Krypton Chloride Excimer Lamps Driven by Sinusoidal ECG

Investigation of the Characteristics of a Pulsed UV Radiation Source Based on an Unlimited Short-Arc Discharge in Xenon

Influence of the Gas Mixture Ratio on the Correlations Between the Excimer XeCl* Emission and the Sealed Gas Temperature in Dielectric Barrier Discharge Lamps