Suppression behavior of water mist containing compound additives on lithium-ion batteries fire
Wenhe Wang,Sen He,Tengfei He,Tianyu You,Trent Parker,Qingsheng Wang
DOI: https://doi.org/10.1016/j.psep.2022.03.062
IF: 7.8
2022-05-01
Process Safety and Environmental Protection
Abstract:In this work, a new type of compound additive and water mist compatible fire extinguishing method was designed, and the effects of its suppression on a 18650 LiMn2O4/Li(Ni0.5Co0.2Mn0.3)O2 lithium-ion battery fire was investigated. To do so, a self-designed experimental platform was used to study the fire extinguishing capabilities and influence of the composite additives containing water mist on a lithium-ion battery fire. Several cell parameters were measured to evaluate the suppression effect of the fire extinguishing method, such as extinguishing time, maximum temperature, and heat release rate. The results show that both physical and chemical additives can play significant physicochemical roles in extinguishing fires and are more effective than pure water mist. The physical additives enhance the heat absorption and cooling as well as radiation heat barrier and oxygen asphyxiation mechanisms by reducing the surface tension and droplet size in the fog field. Furthermore, the chemical additives enhance the fire extinguishing efficiency by decomposing the active gases CO2 and H2O in the fire field and capturing the free radicals of the flame in the battery combustion reaction.Insights into thermal behaviors of thermal runaway (TR) and propagation in a battery enclosure are significant for the safe application of lithium-ion batteries. In this study, the thermal behaviors of TR and its propagation over a lithium-ion battery module in a battery enclosure are investigated via thermal abuse experiments. The conduction heat flux between adjacent cells is measured for the first time. The results show that the onset time of the TR with the enclosure is later than that without the enclosure. However, the cells in the enclosure have a higher maximum TR temperature, and their temperature distribution is more uniform. Moreover, the duration of the TR propagation to adjacent cells in the enclosure is significantly shorter. And the occurrence of a jet fire further increases the maximum temperature of the cell in the enclosure. The measurement of the heat flux shows that the heat conduction intensity between the cells in the enclosure is greater than that without the enclosure. This work is beneficial for understanding the mechanism of TR and its propagation in practical applications and provides valuable references for the safety management of lithium-ion batteries.Hydrogen plays an increasingly significant role in solving the greenhouse effect and energy crisis as a clean fuel that can be obtained by renewable energy, and as a storable energy carrier. As a prerequisite for process safety of hydrogen, issues such as hydrogen embrittlement, fire, and explosion, have been of great interest to research scholars for decades. Based on bibliometrics, this article aims to provide a knowledge structure of publications related to hydrogen safety. Information about 369, 535 and 462 publications related to hydrogen safety from 1957 to 2021 were retrieved from the Web of Science Core Collection, Scopus, and Lens, respectively. The visualization software VOSviewer was employed to carry out the bibliometric analysis. The study found that the USA has the most publications among all countries; the publications from the International Journal of Hydrogen Energy rank the first among all source journals. Based on the advancement of time period, the hot terms in hydrogen safety research can be divided into three themes: storage and detection, combustion and explosion, and ignition and propagation. The results provide a comprehensive overview of this field of research and can help researchers quickly understand the research frontier and the overall status.Jet fire usually appears in natural gas fuel production and transportation due to uncontrolled fuel leakage. Jet fire can impinge on equipment surface or a passive firewall to make the fire plume temperature and the radiant heat flux complex. Experiments of a horizontal jet flame impinging a wall under various fuel initial velocity and nozzle-wall spacing were carried out. Results show the changing relationship between the amount of oxygen required and the actual amount of oxygen results in the different temperature distribution of fire plume on the wall surface. A new dimensionless number is proposed to determine the maximum rising temperature of fire plume on the wall surface. The fire plume volume and the distance between a certain position and fire plume within the viewing angle range of the radiometer, as two important factors, can explain the trend of radiant heat flux well. A virtual total radiant heat flux Qv,tr received by a core area of the horizontal jet fire impinging the wall is estimated. Qv,tr firstly increase -Abstract Truncated-
engineering, environmental, chemical