Abstract:Frequency selective surface (FSS) has extensively been investigated over the past decades. The most famous applications of FSS are used for antennas radome and controlling radar cross section (RCS). FSS radome could reflect the signal out of the band so that the RCS could be reduced by shaping. However, with the development of radar detection technology, the scattering out of the band becomes non-negligible. In order to improve the problem, the FSS rasorber was proposed. It is the combination of the absorber and the radome. In this paper, a wideband transmission FSS rasorber is designed, acting as a stealthy radome to reduce the scattering out of band of the antenna system. The rasorber consists of an absorption layer (LayerA) and a transmission layer (LayerT). The LayerA, which use a resistor-loaded in Jerusalem cross element with non-touching centre, provides stable losses out of band and minimizes losses in the band. The LayerT use as the ground plane of an absorber based on the absorption layer within the total reflection band and providing a transmission window in the band. In order to obtain a wideband transmission, two series chokes are inserted in each leg in the LayerA and the LayerT adopts a second-order resonator. Moreover, the elements are packed densely owing to a skewed grid in the LayerA and the miniaturized non-resonant element in the LayerT. Superdense arrays cause a more stable performance of the rasorber, especially the delay of grating lobes onset. The composite structure is thoroughly analyzed by means of the full-wave numerical simulation. The simulation shows that the -1 dB transmission window is 5.7 ~ 6.7 GHz, and the -10dB reflection band is 2.2 ~ 5.1 GHz. The design would be widely used in broadband antenna system.

Flexible EM Wave Absorber with High Angular Stability and Low Cross Polarization Reflection Level

Tapered Resistive Sheets and FSS Absorber Loading for the Wideband RCS Reduction of the Elliptic Surface at TM Polarization

Flexible Metamaterial Absorber with Tailored Bandwidth and High Absorption Performance

A Broadband Tunable Frequency Selective Surface Absorber For Oblique Incidence Applications

Surface Impedance Modulation of FSS Composite Absorber for RCS Reduction at Normal and Grazing Incidence

Broad bandwidth of thin composite radar absorbing structures embedded with frequency selective surfaces

Polarization Insensitive Absorber with Wide Angular Stability Using Inclined Meander Line Resonators

Design of a Dual-Band Electromagnetic Absorber with Frequency Selective Surfaces

Flexible Broadband Terahertz Absorbers for RCS Reduction on Conformal Surfaces

Design of a Tunable Low-Frequency and Broadband Radar Absorber Based on Active Frequency Selective Surface

Transparent Conformal Metasurface Absorber for Ultrawideband Radar Cross Section Reduction

Anisotropic Absorbing Honeycomb and FSS Composite Structure for Curved Broadband RCS Reduction

Multistate Active Control RCS Signature for the Continuous Adjustment Absorber/reflector Transformation Applications.

Ultra-Wide-Band and Polarization-Insensitive Metamaterial Absorber With Resistive Ink Sheet for RCS Reduction Applications

Design of an Adjustable Polarization-Independent and Wideband Electromagnetic Absorber

Ultrabroadband Double-Sided and Dual-Tuned Active Absorber for UHF Band

Flexible Design and Realization of Wideband Microwave Absorber with Double-Layered Resistor Loaded FSS

A Thin and Broadband Tunable Radar Absorber Using Active Frequency Selective Surface

A Wideband Transmission Frequency Selective Surface Rasorber

Tapered Resistive Sheets Loading to the FSS Absorber for the Wide-Angle Monostatic RCS Reduction Applications

Ultrawideband Microwave Absorber Conformable on Nondevelopable Curved Surfaces Based on the Hauberk Structure