Abstract:Abstract The feasible resolution of angular displacement measurement by an optical angle sensor based on laser autocollimation is investigated. Improving the sensor sensitivity while maintaining the noise level of the sensor signal as low as possible is necessary to achieve high-resolution angular displacement measurement. In this paper, the contribution of each component, such as a photodiode, a trans-impedance amplifier, and an analog-to-digital converter in the optical angle sensor, to the noise level of the sensor signal is first estimated on the basis of theoretical equations. The feasible sensitivity of the optical angle sensor is also estimated in numerical calculations. The sensitivity of a photodiode element at the edge of its photosensitive area is evaluated in experiments to realize the estimation of the angle sensor sensitivity. Experimental results are applied to the numerical calculations. The influences of the measurement laser beam diameter, the spot diameter of the focused laser beam on the photosensitive area, and the focal length of the collimator objective of the optical angle sensor are also considered in the numerical calculations. Finally, a prototype optical setup is developed. Experiments are performed to demonstrate that a compact optical angle sensor based on laser autocollimation with a collimator objective having a focal length shorter than 100 mm can achieve a resolution beyond 0.001 arc-second with a bandwidth of 1 kHz. This resolution is better than those achieved by commercial autocollimators employing an image sensor or a position-sensitive detector. The industrial contribution of this paper lies in the detailed breakdown of noise components in the readout signal of an angle sensor in a practical condition and the systematic estimation of its feasible resolution as well as its sensitivity.

Image-type displacement measurement resolution improvement without magnification imaging

Small Angular Displacement Measurement Based on an Autocollimator and a Common-Path Compensation Principle.

Nano-Displacement Measurement Based On Virtual Pinhole Confocal Method

Superresolution Confocal Technology For Displacement Measurements Based On Total Internal Reflection

Axial nano-displacement measurement with high resolution and wide range based on asymmetrical illumination.

An Axial Displacement Measurement Relying on the Double-Helix Light Beam

Thin-Volume Image-Type Angular Displacement Measurement Based on Point Light Reflection

A High-Resolution Displacement Sensor Based on a Grating Interferometer with the Phase Modulation Technique

An ultracompact high-resolution displacement sensor based on self-interference effect of single optical nanograting

Small-size, high-resolution angular displacement measurement technology based on an imaging detector

Nanometer-scale Displacement Sensor Based on Phase-Sensitive Diffraction Grating.

A robust sub-pixel subdivision algorithm for image-type angular displacement measurement

Differential internal multi-reflection method for nano-displacement measurement

Grating Interferometry with High Optical Subdivision

High-precision Microdisplacement Sensor Based on Zeroth-Order Diffraction Using a Single-Layer Optical Grating.

Equivalent Measurement and Real-Time Compensation of Error Caused by Intensity Change in Deep Sub-Nanometer Displacement Measuring Interferometry

Optical Grating Diffraction and Optical Beat Frequency Principle-Based Ultrahigh Resolution Displacement Measurement System

Feasible Resolution of Angular Displacement Measurement by an Optical Angle Sensor Based on Laser Autocollimation

A New Image Grating Sensor for Linear Displacement Measurement and Its Error Analysis

Precision Displacement Measurement with Nanometer Resolution Based on Transmissive Laser Air-Wedge Interference

High-precision 2D grating displacement measurement system based on double-spatial heterodyne optical path interleaving