Abstract:Cement plays a crucial role in mortar composition, and its particles exhibit a strong tendency to flocculate when mixed with water. This flocculation necessitates the addition of substantial water to improve the workability of mortar or concrete. However, this extra water does not contribute to the hydration reaction, potentially weakening the mechanical properties of the mortar. The introduction of superplasticizers has addressed this issue by reducing the water demand. Nevertheless, a common practice in construction is to use a standard dosage of superplasticizers for the same type of cement, even when sourced from different cement factories, which may affect material performance. This study investigated the influence of varying superplasticizer dosages on Portland pozzolana cement from different Ethiopian cement factories, examining the morphological characteristics of masonry mortar. Specifically, it evaluated the impact on cracks, porosity, and surface structure across different curing ages, as well as assessed the mortar's physical and mechanical properties. Mortar samples prepared using cement from three factories, labeled A, B, and C, with constant cement‐to‐sand ratios of 1:3 and water‐to‐cement ratios of 0.5. Superplasticizer added in varying amounts 0%, 0.6%, 0.8%, and 1%. The morphological analysis conducted using a 3D optical surface profiler microscope at 1, 7, 21, and 28 days. Besides these standard physical and mechanical tests also performed on all samples. The results demonstrated that addition of superplasticizers significantly influenced the surface morphology of mortar samples. Mortars A and B exhibited denser structures with superplasticizer dosages 0.8% and 1%, respectively, whereas mortar C displayed a denser structure in its control state (without superplasticizer). The flexural and compressive strength tests also revealed notable differences. Sample A2 (0.8%) from group A, sample B3 (1%) from group B, and sample C0 (0%) from group C achieved the highest strength within their respective groups at 28 days. The findings suggest that it is essential to evaluate the specific properties of cement before applying a standardized superplasticizer dosage, as variations in cement production can significantly influence the performance of the mortar.

Mechanical Properties and Microstructure Evaluation of Cement Mortar with Different Cement Strength Classes by Image Analysis

Mechanical Characterization of Polyacrylate Emulsion Modified Mortars

The Mechanical Properties of Polymer-cement Mortar

Mechanical and fracture properties of mortars reinforced with glass fibre and prepared with different cement types

Influences of water by cement ratio on mechanical properties of mortars submitted to drying

Microstructural and Compressive Strength Analysis for Cement Mortar with Industrial Waste Materials

Pore Evaluation and Distribution in Cement Mortar Using Digital Image Processing

Microcrack and Porosity Development in Sealed Cement Mortars Measured with Micro-Computed Tomography

Multiscale Models to Evaluate the Impact of Chemical Compositions and Test Conditions on the Mechanical Properties of Cement Mortar for Tile Adhesive Applications

A new method for predicting compressive strength of cement-based materials

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Influence of Sand-Cement Ratio and Polycarboxylate Superplasticizer on the Basic Properties of Mortar Based on Water Film Thickness

Effects of Water-to-Cement Ratio on Pore Structure Evolution and Strength Development of Cement Slurry Based on HYMOSTRUC3D and Micro-CT

Effect of Superplasticizer in Cement Type on Morphological Characteristics of Masonry Mortar

Effects of Blended-Cement Paste Chemical Composition Changes on Some Strength Gains of Blended-Mortars

Mechanical and adhesion properties of polymer-modified cement mortars in relation with their microstructure

Mechanical and Durability Properties of Mortars Incorporating Red Mud, Ground Granulated Blast Furnace Slag, and Electric Arc Furnace Dust

Analysis of Early-Age Hydration Behavior and Micro-Mechanism of Coral Sand Cement Mortar

Effect of Epoxy Latexes on the Mechanical Behavior and Porosity Property of Cement Mortar with Different Degrees of Hydration and Polymerization

Investigation on Hydration and Mechanical Properties of Mortar Containing Limestone Powder and Fly Ash Based on the Coupled Chemical–Thermal–Mechanical Method

Relationship Between Microscopic Pore Structure and Strength of Cement-Based Materials with Low Water-Binder Ratio Under Sulfate Attack Environment