Abstract:Due to the increasing demand for electricity with the development of production and general infrastructure, increasing the production of uranium as an economically and environmentally efficient source of energy is an urgent problem. The purpose of this study is to develop an electrochemical method for the regeneration of iron (III) ions used as a uranium oxidizer in the process of in-situ leaching of uranium minerals with sulfuric acid solutions. Methods. The mechanism of reactions in the iron (II)-iron (III) redox system was studied by recording potentiodynamic polarization curves and conducting electrolysis of the oxidation of divalent iron ions under galvanostatic conditions. Results and discussion. Cathode-anodic and anodic-cathode cyclic polarization curves taken on platinum electrodes showed that the redox reactions of iron ions are reversible and these reactions occur at a slight overvoltage. The influence of the main electrochemical parameters (current density, concentrations of iron (II) ions and sulfuric acid) on the oxidation of divalent iron ions was studied for the first time using granular anode electrodes, the electrode spaces of which are separated by an anionite membrane. It has been found that the use of granular graphite electrodes in the oxidation divalent iron ions increases the current output by more than 2 times compared to a plate graphite electrode. Conclusion. According to the results of the study, it was noted that under optimal conditions, the current output of the oxidation of divalent iron ions exceeds 90%. Extensive research has shown that trivalent iron ions, widely used in the in-situ leaching process for uranium production, can be regenerated by electrochemical methods.

LEACHING OF URANIUM ORES IN THE PROCESS OF SODIUM SULPHATE ELECTROLYSIS

An electrochemical method for the regeneration of trivalent iron to increase the efficiency of in-situ leaching of uranium

Electrochemical Techniques for Uranium Extraction from Water

In-situ leaching of molybdenum and uranium by percarbonate and chloride-hypochlorite solutions

Study on the electrodeposition of uranium in chloride molten salt

A Cascade Electro-Dehydration Process for Simultaneous Extraction and Enrichment of Uranium from Simulated Seawater

Sulfur enhancement effects for uranium bioleaching in column reactors from a refractory uranium ore

Electrochemical Electron Transfer and Crystallization Process of Uranium (vi) in Sodium Salt Solution

Uranium extraction from sulphuric acid leach liquor by Cyanex®272 as intermediate in nuclear fuel cell

Uranium In Situ Leaching Sulfur Chemistry

Confirmation and elimination of cyclic electrolysis of uranium ions in molten salts

Uranium electrolytic deposition with regenerable Se 2− active sites at low cell voltage

Separation and recovery of uranium and beryllium from acidic sulphate solutions by solvent extraction using mixture of organophosphonic extractants

Pressure Acid Leaching of A Refractory Uranium Ore

Ultrasound assisted sodium-chlorate leaching of selenium from copper anode slime

Uranium elimination and recovery from wastewater with ligand chelation-enhanced electrocoagulation

Ultrasonication-enhanced regeneration of resin for adsorbing uranium from leach solutions generated via in-situ leaching

Spontaneous electrochemical uranium extraction from wastewater with net electrical energy production

Selective Electrochemical Separation and Recovery of Uranium from Mixture of Uranium(VI) and Lanthanide(III) Ions in Aqueous Medium

Separation of U4+/UO22+ from the Chloride Molten Salts with Microplasma Gaseous Anodes

Efficient three-step strategy for reduction recovery of high purity uranium oxide from nuclear wastewater