Abstract:Powder metallurgy (PM) of titanium is a potentially cost-effective alternative to conventional wrought titanium. This article examines both traditional and emerging technologies, including the production of powder, and the sintering, microstructure, and mechanical properties of PM Ti. The production methods of powder are classified into two categories: (1) powder that is produced as the product of extractive metallurgy processes, and (2) powder that is made from Ti sponge, ingot, mill products, or scrap. A new hydrogen-assisted magnesium reduction (HAMR) process is also discussed. The mechanical properties of Ti-6Al-4V produced using various PM processes are analyzed based on their dependence on unique microstructural features, oxygen content, porosity, and grain size. In particular, the fatigue properties of PM Ti-6Al-4V are examined as functions of microstructure. A hydrogen-enabled approach for microstructural engineering that can be used to produce PM Ti with wrought-like microstructure and properties is also presented. Abbreviations: AM: additive manufacturing; ARC: Albany Research Center; BE: blended elemental; BUS: broken-up structure; CCGA: close-coupled gas atomisation; CHIP: CIP-sinter-HIP; CIP: cold isostatic pressing; CP-Ti: commercially pure Ti; DRTS: direct reduction of Ti-slag; CSIR: Council for Scientific and Industrial Research (South Africa); CSIRO: Commonwealth Scientific and Industrial Research Organization (Australia); EIGA: electrode induction gas atomisation; EMR: electronically mediated reduction; FFC: Fray, Farthing, and Chen; GA: gas atomisation; GIF: gaseous isostatic forging; GSD: granulation-sintering-deoxygenation; HAMR: hydrogen-assisted magnesium reduction; HDH: hydride–dehydride; HIP: hot isostatic pressing; HSPT: hydrogen sintering and phase transformation; MA: master alloy; MER: Materials & Electrochemical Research Corporation (US); MHR: metal hydride reduction; MIM: metal injection molding; OM: optical microscope; OS: Ono and Suzuki; PA: pre-alloyed; P/C: performance to cost ratio; PIF: pneumatic isostatic forging; PM: powder metallurgy; PREP: plasma rotating electrode process; PP: post-processing; PS: press and sinter; QIT: Quebec Iron & Titane, Inc. (Canada); SEM: scanning electron microscope; SPS: spark plasma sintering; SOM: solid oxide membrane; THP: thermohydrogen processing; TMP: thermomechanical processing; UFG: ultrafine grain; UGS: upgraded titanium slag; UTS: ultimate tensile strength; USTB: University of Science and Technology Beijing (China); VA: vacuum atomisation; VHP: vacuum hot pressing; WP: wrought process; YS: yield strength

New Approach to Electron Beam Synthesis of Powder and Composite Materials. Part 2. Practical Results for Alloy VT6

Developing New Materials for Electron Beam Melting: Experiences and Challenges

Nanostructured titanium alloys: New developments and application prospects

Synthesis of Aluminum Titanate Based Composite Ceramics Using High-Power Fast-Electron Beam

Powder-bed additive manufacturing for aerospace application: Techniques, metallic and metal/ceramic composite materials and trends

Alloying effect of Ti-6Al-4V on composite of 321 stainless steel fabricated by electron beam additive manufacturing

Development of light composite materials with low coefficients of thermal expansion

Prospects of Production and Application of Hybrid Structures and Composites Made of Titanium Alloys and Nitinol: Overview

Texturing and Phase Evolution in Ti-6Al-4V: Effect of Electron Beam Melting Process, Powder Re-Using, and HIP Treatment

Powder metallurgy of titanium – past, present, and future

Compositionally-tailored steel-based materials manufactured by electron beam melting using blended pre-alloyed powders

Surface Modification and Alloying of Aluminum and Titanium Alloys with Low-Energy, High-Current Electron Beams

Development of the Production Technology of Cast Aluminum Matrix Composite by Alumina Strengthening Phase Synthesis in an Aluminum Melt

In-situ synthesized TiC/Ti-6Al-4V composites by elemental powder mixing and spark plasma sintering: Microstructural evolution and mechanical properties

A powder-based approach to semisolid processing of metals for fabrication of die-castings and composites

Development of Bio-Compatible Beta Ti Alloy Powders for Additive Manufacturing for Application in Patient-Specific Orthopedic Implants

Electrospark modification of the surface of additive VT6 alloy with high-entropy and amorphous electrodes

Fabrication of Spherical Steel Powder with Superequilibrium Nitrogen Content for Laser Powder Bed Fusion Additive Manufacturing

Commercial Scale Uniform Powder Coating for Metal Additive Manufacturing

Electron Beam Based Additive Manufacturing of Alloy 247 for Turbine Engine Application: From Research towards Industrialization