Abstract:It is a formidable challenge to simultaneously achieve wide gamut, high resolution, high-speed while low-cost manufacturability, long-term stability, and viewing-angle independence in structural colors for practical applications. The conventional nanofabrication techniques fail to match the requirement in low-cost, large-scale and flexible manufacturing. Processing by ultrashort lasers can achieve extremely high throughput while suffering from a narrow gamut of 15% sRGB or angle-dependent colors. Here, we demonstrate an all-in-one solution for ultrafast laser-produced structural colors on ultrathin hybrid films that comprise an absorbent TiAlN layer coating on a metallic TiN layer. Under pulsed laser irradiation, the absorption behaviors of the TiAlN-TiN hybrid films are tailored by photothermal-induced oxidation on the topmost TiAlN. The oxidized films exhibit double-resonance absorption, which is attributed to the non-trivial phase shifts both at the oxide-TiAlN interface, and at the TiAlN-TiN interface. By varying the accumulated laser fluence to modulate the oxidation depth, an unprecedented large gamut of 90% sRGB is obtained. Our highly reproducible printing technique manifests angle-insensitive colors the variation of Hue is <0.14pi when viewing angles changing from 6 to 60. The full-color printing speed reaches to 1.4 cm2/s and the highest printing resolution exceeds 25000 dpi. The durability of the laser-printed colors is confirmed by fastness examination, including salt fog, double-85, light bleaching, and adhesion tests. These features render our technique to be competitive for high-throughput industrial applications.

Angle‐Insensitive and CMOS‐Compatible Subwavelength Color Printing

Single-color Peripheral Photoinhibition Lithography of Nanophotonic Structures

Grayscale Color 3D/4D Printing Via Orthogonal Photochemistry

Full-Color Subwavelength Printing with Gap-Plasmonic Optical Antennas

Extremely‐Fine Color Printing by 2D Materials with the Synergetic Effects of Fabry–Pérot Cavity and Exciton Absorption

Simulation Study of Dynamic Color Modulation Based on Tunable Micro/Nano-Structure Array

Solution-processable multi-color printing using UV nanoimprint lithography

Two‐Chromatic Printing Creates Skin‐Inspired Geminate Patterns Featuring Crosstalk‐Free Chemical and Physical Colors

All-Dielectric Silicon Nanoring Metasurface for Full-Color Printing

Ultrahigh resolution and color gamut with scattering-reducing transmissive pixels

Multi-color inkless UV printing using angle-independent structural color paper

Free-form Surface-Oriented Five-Axis Single-Point Color Printing Technology.

Wide Gamut, Angle-Insensitive Structural Colors Based on Deep-Subwavelength Bilayer Media

Painting with Hue, Saturation, and Brightness Control by Nanoscale 3D Printing

Wide-range Angle-sensitive Plasmonic Color Printing on Lossy-Resonator Substrates

Dynamic Color Displays Using Stepwise Cavity Resonators

Deep Subwavelength Wide‐Angle Structural Colors at the Single Pixel Level

Three-Dimensional Printing of Structural Color Using a Femtoliter Meniscus

Lithography-Free Nanofilm Color Filters Composed of CMOS-Compatible Materials

Generation of highly integrated multiple vivid colours using a three-dimensional broadband perfect absorber

High-speed laser writing of structural colors for full-color inkless printing