Abstract:<p>Interfacial solar steam generation offers a sustainable and affordable technology for seawater desalination and water treatment. During solar steam generation the temperature of the solar evaporation surface is generally higher than the bulk water, which results in energy loss to the bulk water by heat conduction. While many strategies have been developed to minimize and/or eliminate the conductive heat loss, this study focuses on completely reversing conductive heat loss and turning it into an energy extraction from the bulk water to enhance the evaporation during solar steam generation. This was achieved by introducing a certain area of cold evaporation surface between the solar evaporation surface and the bulk water, which led to the conductive heat loss from the solar evaporation surface being completely absorbed and consumed by the cold evaporation surface before reaching the bulk water. Meanwhile, due to its lower surface temperature, the cold evaporation was also able to extract energy from the bulk water, turning the heat conduction loss from the evaporator to the bulk water into the energy harvest from the bulk water. When the surface area of the cold evaporation surface was increased to a certain point (50.3 cm<sup>2</sup> in this work), heat flow was reversed, and energy was extracted from the bulk water by the evaporator to enhance solar evaporation. Theoretical simulations agreed well with the experimental results. In addition, as parasitic effects, the cold evaporation surface was also able to gain energy from the ambient air and lower the temperature of the solar evaporation surface, reducing both radiation and convection energy loss. As a result, the evaporation rate and the light-to-vapor energy efficiency of the evaporator were far beyond the theoretical limits, confirming that this strategy has great potential for further practical applications.</p>

Steam generation under one sun enabled by a floating structure with thermal concentration

Solar Steam Generation: Steam by Thermal Concentration

Integrated Carbonized Corncobs Solar Steam Generator with Janus Structure

Solar steam generation by heat localization

Boosting solar steam generation by structure enhanced energy management

Solar-driven High-Temperature Steam Generation at Ambient Pressure

High‐Performance Integrated Solar Steam Generator for Synergetic Freshwater Production, Salt Harvesting, and Electricity Generation

Three-Dimensional Porous Solar-Driven Interfacial Evaporator for High-Efficiency Steam Generation under Low Solar Flux

Simultaneous Solar Steam and Electricity Generation from Synergistic Salinity‐Temperature Gradient

3D-Printed, All-In-One Evaporator for High-Efficiency Solar Steam Generation under 1 Sun Illumination

Direct Vapor Generation Through Localized Solar Heating Via Carbon-Nanotube Nanofluid

High-Efficiency Superheated Steam Generation for Portable Sterilization under Ambient Pressure and Low Solar Flux

Photothermal Materials for Efficient Solar Powered Steam Generation

Fast-Growing Field of Interfacial Solar Steam Generation: Evolutional Materials, Engineered Architectures, and Synergistic Applications

Solar-driven photovoltaic-steam-thermoelectric-steam cogeneration system by the interfacial cooling design

Micro-flower like 1T-2H-MoS2@ZIF8@C composites for efficient interfacial solar vapor generation

Reversing heat conduction loss: Extracting energy from bulk water to enhance solar steam generation

Ultrahigh-efficiency desalination via a thermally-localized multistage solar still

A photothermal reservoir for highly efficient solar steam generation without bulk water

Low-cost Carbonized Kelp for Highly Efficient Solar Steam Generation

Storage and Recycling of Interfacial Solar Steam Enthalpy