Abstract:<p>Interfacial solar steam generation offers a sustainable and affordable technology for seawater desalination and water treatment. During solar steam generation the temperature of the solar evaporation surface is generally higher than the bulk water, which results in energy loss to the bulk water by heat conduction. While many strategies have been developed to minimize and/or eliminate the conductive heat loss, this study focuses on completely reversing conductive heat loss and turning it into an energy extraction from the bulk water to enhance the evaporation during solar steam generation. This was achieved by introducing a certain area of cold evaporation surface between the solar evaporation surface and the bulk water, which led to the conductive heat loss from the solar evaporation surface being completely absorbed and consumed by the cold evaporation surface before reaching the bulk water. Meanwhile, due to its lower surface temperature, the cold evaporation was also able to extract energy from the bulk water, turning the heat conduction loss from the evaporator to the bulk water into the energy harvest from the bulk water. When the surface area of the cold evaporation surface was increased to a certain point (50.3 cm<sup>2</sup> in this work), heat flow was reversed, and energy was extracted from the bulk water by the evaporator to enhance solar evaporation. Theoretical simulations agreed well with the experimental results. In addition, as parasitic effects, the cold evaporation surface was also able to gain energy from the ambient air and lower the temperature of the solar evaporation surface, reducing both radiation and convection energy loss. As a result, the evaporation rate and the light-to-vapor energy efficiency of the evaporator were far beyond the theoretical limits, confirming that this strategy has great potential for further practical applications.</p>

Reversing heat conduction loss: Extracting energy from bulk water to enhance solar steam generation

All‐Cold Evaporation under One Sun with Zero Energy Loss by Using a Heatsink Inspired Solar Evaporator

Boosting solar steam generation by structure enhanced energy management

Enhancing solar steam generation using a highly thermally conductive evaporator support

A Salt-Rejecting Solar Evaporator for Continuous Steam Generation

Simultaneous Solar Steam and Electricity Generation from Synergistic Salinity‐Temperature Gradient

More from less: improving solar steam generation by selectively removing a portion of evaporation surface

Synchronously managed water and heat transportation for highly efficient interfacial solar desalination

Solar-thermo-radiative evaporator for continuous steam generation and salt harvesting

High‐Performance Integrated Solar Steam Generator for Synergetic Freshwater Production, Salt Harvesting, and Electricity Generation

Same materials, bigger output: A reversibly transformable 2D–3D photothermal evaporator for highly efficient solar steam generation

High Efficient 3D Solar Interfacial Evaporator: Achieved by the Synergy of Simple Material and Structure

Reed-root-based solar-driven evaporator with a faster capillary water transfer rate for effective steam generation

A Hollow and Compressible 3D Photothermal Evaporator for Highly Efficient Solar Steam Generation without Energy Loss

Three-Dimensional Porous Solar-Driven Interfacial Evaporator for High-Efficiency Steam Generation under Low Solar Flux

Phase Change Material Enhanced Sustained and Energy-Efficient Solar-Thermal Water Desalination

Conical solar-thermo-radiative evaporator for sustainable desalination and salt recovery

Scalable and low-cost fabrication of hydrophobic PVDF/WS2 porous membrane for highly efficient solar steam generation

Thermal Management of the Solar Evaporation Process

Capillary-flow-optimized Heat Localization Induced by Air-enclosed 3D Hierarchical Network for Elevated Solar Evaporation.

A 3D Opened Hollow Photothermal Evaporator for Highly Efficient Solar Steam Generation