Abstract:A three‐dimensional (3D) cylindrical opened‐porous aerogel is fabricated via a Pickering emulsion‐mediated polymerization route. All‐cold solar evaporation with zero energy loss and significantly increased extra energy harvest is achieved. Vapor diffusion is enhanced, and inner evaporation surfaces are activated via external convective flow. The evaporator can deliver stable vapor generation for highly concentrated salt solution (20 wt.% NaCl). Porous‐structured evaporators have been fabricated for achieving a high clean water throughput due to their maximized surface area. However, most of the evaporation surfaces in the porous structure are not active because of the trapped vapor in pores. Herein, a three‐dimensional (3D) cylindrical aerogel‐based photothermal evaporator with a disordered interconnected hierarchical porous structure is developed via a Pickering emulsion‐involved polymerization method. The obtained cotton cellulose/aramid nanofibers/polypyrrole (CAP) aerogel‐based evaporator achieved all‐cold evaporation under 1.0 sun irradiation, which not only completely eliminated energy loss via radiation, convection, and conduction, but also harvested massive extra energy from the surrounding environment and bulk water, thus significantly increasing the total energy input for vapor generation to deliver an extremely high evaporation rate of 5.368 kg m−2 h−1. In addition, with the external convective flow, solar steam generation over the evaporator can be dramatically enhanced due to fast vapor diffusion out of its unique opened porous structure, realizing an ultrahigh evaporation rate of 18.539 kg m−2 h−1 under 1.0 sun and 4.0 m s−1. Moreover, this evaporator can continuously operate with concentrated salt solution (20 wt.% NaCl). This work advances rational design and construction of solar evaporator to promote the application of solar evaporation technology in freshwater production.

A 3D Opened Hollow Photothermal Evaporator for Highly Efficient Solar Steam Generation

A Hollow and Compressible 3D Photothermal Evaporator for Highly Efficient Solar Steam Generation without Energy Loss

High Efficient 3D Solar Interfacial Evaporator: Achieved by the Synergy of Simple Material and Structure

Multi-Shelled Hollow Porous Carbon Nanospheres-Based Evaporator for Highly Efficient Solar-Driven Desalination

3D wood-based evaporator for highly efficient solar steam generation

Same materials, bigger output: A reversibly transformable 2D–3D photothermal evaporator for highly efficient solar steam generation

3D-Printed, All-In-One Evaporator for High-Efficiency Solar Steam Generation under 1 Sun Illumination

Enhancing solar steam generation using a highly thermally conductive evaporator support

Three-Dimensional Porous Solar-Driven Interfacial Evaporator for High-Efficiency Steam Generation under Low Solar Flux

Robust and Flexible 3D Photothermal Evaporator with Heat Storage for High-Performance Solar-Driven Evaporation

Pickering Emulsion Templated 3D Cylindrical Open Porous Aerogel for Highly Efficient Solar Steam Generation

3D Cellulose‐Based Solar Evaporator with Tunable Porous Structures for High Steam Generation (Adv. Sustainable Syst. 6/2024)

Three-dimensional Hierarchical CuxS-based Evaporator for High-Efficiency Multifunctional Solar Distillation

Scalable and low-cost fabrication of hydrophobic PVDF/WS2 porous membrane for highly efficient solar steam generation

3D printed thermo-responsive hydrogel evaporator with enhanced water transport for efficient solar steam generation

3D network structure and hydrophobic Ni-G-WO3-x solar-driven interfacial evaporator for highly efficient steam generation

A 3D Photothermal Structure Toward Improved Energy Efficiency in Solar Steam Generation

Thermal and electrical conductive 2D CuO evaporator for all-day steam generation

Hydrogel-based 3D evaporator with cross-linked fixation by carbon dots for ultra-high and stable solar steam generation

Capillary-flow-optimized Heat Localization Induced by Air-enclosed 3D Hierarchical Network for Elevated Solar Evaporation.

Low-tortuosity Water Microchannels Boosting Energy Utilization for High Water Flux Solar Distillation.