Abstract:Abstract Glucose oxidase based enzymatic biofuel cell is the promising technology for implantable medical devices’ power supply. It can open up opportunities for the long‐term implantation of the medical devices like pacemakers without the necessity for replacement of the batteries. Increasing of the cathode efficiency is one of the issues that should be solved before a practical application of biofuel cells. The high catalytic activity of the cathode provides a significant contribution to the efficiency of biofuel cells operation. The creation of cathodes of implantable biofuel cell with the increased power density could resolve the problem with a slow kinetics of the cathodic oxygen reduction reaction. It is especially urgent in the conditions of implantation in physiological fluids, where the oxygen concentration is relatively low. Enzymes application could be an optimal way to increase an efficiency of the cathodic reaction, but enzymes long‐time stability is still in question. Thus, non‐organic and synthetic organic catalysts are considered. In this study, a new type of a cathode for enzymatic biofuel cells is presented. This cathode combines two catalysts: inorganic with platinum nanoparticles (PtNPs) and organic in the form of poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) cross‐linked by poly(ethylene glycol) diglycidyl ether (PEGDE). The received electrodes were investigated by several electrochemical methods: cyclic voltammetry, chronopotentiometry and linear sweep voltammetry method on a rotating disk electrode. It was shown that the combination of PtNPs and PEDOT:PSS provides the maximum cathodic current, due to the fact that both catalysts contribute to the oxygen reduction reaction. The maximum cathodic current was 7.5 μA for an electrode containing 5 % PEGDE with PtNPs, heat‐treated for one hour at 120 °C. The electrodes without platinum nanoparticles were also investigated. This research showed that PEDOT:PSS provides a significant contribution to the overall catalytic effect demonstrated by the electrode proposed in the study. Scanning electron microscopy and X‐ray fluorescence analysis studies showed that the electrodes with combination of PtNPs and PEDOT:PSS were almost fully covered by catalysts.

Preparation of a ferrocene mediated bioanode for biofuel cells by MWCNTs, polyethylenimine and glutaraldehyde: glucose oxidase immobilization and characterization

In Situ Fabrication of Cobalt Nanoflowers on Sulfonated and Fluorinated Poly (arylene Ether Ketone-Benzimidazole) Template Film for the Electrocatalytic Oxidation of Glucose

Noble-Metal-Free WO3-Decorated Carbon Nanotubes with Strong W–C Bonds for Boosting an Electrocatalytic Glucose Oxidation Reaction

Enhanced Performance of a Glucose/o(2) Biofuel Cell Assembled with Laccase-Covalently Immobilized Three-Dimensional Macroporous Gold Film-Based Biocathode and Bacterial Surface Displayed Glucose Dehydrogenase-Based Bioanode.

Green synthesis of ZnO nanoparticles decorated on polyindole functionalized-MCNTs and used as anode material for enzymatic biofuel cell applications

Development of glucose oxidase-based bioanodes for enzyme fuel cell applications

Thermal Annealing‐Enhanced Bioelectrocatalysis in Membraneless Glucose/Oxygen Biofuel Cell based on Hydrophilic Carbon Fibers

Layer-by-Layer Assembly of Carbon Nanotubes Modified with Invertase/Glucose Dehydrogenase Cascade for Sucrose/O2Biofuel Cell

Layer-By-Layer Assembled Carbon Nanotube Immobilized Enzyme Cascade for Sucrose/O2 Biofuel Cell Utilization

A Self-Powered Enzymatic Glucose Sensor Utilizing Bimetallic Nanoparticle Composites Modified Pencil Graphite Electrodes as Cathode

Carbon Nanotubes Coated with Platinum Nanoparticles As Anode of Biofuel Cell

Effects of multiple polyaniline layers immobilized on carbon nanotube and glutaraldehyde on performance and stability of biofuel cell

Application of Electrically Conducting Nanocomposite Material Polythiophene@NiO/Frt/GOx as Anode for Enzymatic Biofuel Cells

Research on Flexible Thin-Disk Glucose Biofuel Cells Based on Single-Walled Carbon Nanotube Electrodes

Membrane/mediator-free rechargeable enzymatic biofuel cell utilizing graphene/single-wall carbon nanotube cogel electrodes

Fabrication of biofuel cell containing enzyme catalyst immobilized by layer-by-layer method

A Miniature Glucose/o2 Biofuel Cell with Single-Walled Carbon Nanotubes-Modified Carbon Fiber Microelectrodes As the Substrate

Carbon Nanotube-Hydroxyapatite Nanocomposite: A Novel Platform for Glucose/O-2 Biofuel Cell

Applying Co3O4@nanoporous Carbon to Nonenzymatic Glucose Biofuel Cell and Biosensor

A composite cathode of biofuel cell based on cross‐linked Poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate and platinum nanoparticles

Separate immobilization of glucose oxidase and trehalase, and optimization of enzyme-carbon nanotube layers for the anode of enzymatic fuel cells utilizing trehalose