Abstract:Abstract Glucose oxidase based enzymatic biofuel cell is the promising technology for implantable medical devices’ power supply. It can open up opportunities for the long‐term implantation of the medical devices like pacemakers without the necessity for replacement of the batteries. Increasing of the cathode efficiency is one of the issues that should be solved before a practical application of biofuel cells. The high catalytic activity of the cathode provides a significant contribution to the efficiency of biofuel cells operation. The creation of cathodes of implantable biofuel cell with the increased power density could resolve the problem with a slow kinetics of the cathodic oxygen reduction reaction. It is especially urgent in the conditions of implantation in physiological fluids, where the oxygen concentration is relatively low. Enzymes application could be an optimal way to increase an efficiency of the cathodic reaction, but enzymes long‐time stability is still in question. Thus, non‐organic and synthetic organic catalysts are considered. In this study, a new type of a cathode for enzymatic biofuel cells is presented. This cathode combines two catalysts: inorganic with platinum nanoparticles (PtNPs) and organic in the form of poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) cross‐linked by poly(ethylene glycol) diglycidyl ether (PEGDE). The received electrodes were investigated by several electrochemical methods: cyclic voltammetry, chronopotentiometry and linear sweep voltammetry method on a rotating disk electrode. It was shown that the combination of PtNPs and PEDOT:PSS provides the maximum cathodic current, due to the fact that both catalysts contribute to the oxygen reduction reaction. The maximum cathodic current was 7.5 μA for an electrode containing 5 % PEGDE with PtNPs, heat‐treated for one hour at 120 °C. The electrodes without platinum nanoparticles were also investigated. This research showed that PEDOT:PSS provides a significant contribution to the overall catalytic effect demonstrated by the electrode proposed in the study. Scanning electron microscopy and X‐ray fluorescence analysis studies showed that the electrodes with combination of PtNPs and PEDOT:PSS were almost fully covered by catalysts.

Application of Electrically Conducting Nanocomposite Material Polythiophene@NiO/Frt/GOx as Anode for Enzymatic Biofuel Cells

Embedment of Well Dispersed Nickel Nanoparticles in Sulfonate and Benzimidazole Functionalized Poly (arylene Ether Ketone) Film for the Electrocatalytic Oxidation of Glucose

Green synthesis of ZnO nanoparticles decorated on polyindole functionalized-MCNTs and used as anode material for enzymatic biofuel cell applications

Recent Fuel Cell Progress in Nano Gold Hybrid Materials for Oxygen Reduction Reaction in Alkaline Media

Fabrication and characterization of electrically conducting electrochemically synthesized polypyrrole-based enzymatic biofuel cell anode with biocompatible redox mediator vitamin K3

Enhanced Performance of a Glucose/o(2) Biofuel Cell Assembled with Laccase-Covalently Immobilized Three-Dimensional Macroporous Gold Film-Based Biocathode and Bacterial Surface Displayed Glucose Dehydrogenase-Based Bioanode.

A composite cathode of biofuel cell based on cross‐linked Poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate and platinum nanoparticles

A Biofuel Cell with a Single-Walled Carbon Nanohorn-Based Bioanode Operating at Physiological Condition

Fabrication of (GOx/Pt-DENs)n/CNTs Nanocomposite and their Electrochemical Properties for Anode in Biofuel Cell

Facile electrochemical fabrication of Nickel-Coated Polydiphenylamine (Ni/PDPA) nanocomposite material as efficient anode catalyst for direct alcohol fuel cell application

Carbon Nanotubes Coated with Platinum Nanoparticles As Anode of Biofuel Cell

Thermal Annealing‐Enhanced Bioelectrocatalysis in Membraneless Glucose/Oxygen Biofuel Cell based on Hydrophilic Carbon Fibers

A Self-Powered Enzymatic Glucose Sensor Utilizing Bimetallic Nanoparticle Composites Modified Pencil Graphite Electrodes as Cathode

Development of glucose oxidase-based bioanodes for enzyme fuel cell applications

A membrane-less Glucose/O2 non-enzymatic fuel cell based on bimetallic Pd-Au nanostructure anode and air-breathing cathode: Towards micro-power applications at neutral pH

Nickel Flower/Conducting Polymer Composite for Effective Ethanol Electrooxidation in Alkaline Medium

Non-enzymatic glucose biofuel cells based on highly porous PtxNi1-x nanoalloys

Development of a new biocathode for a single enzyme biofuel cell fuelled by glucose

Electrochemical Studies on Glucose Oxidation in an Enzymatic Fuel Cell with Enzyme Immobilized on to Reduced Graphene Oxide Surface

Synthesis and characterization of reduced graphene oxide-iron oxide nanocomposite as a potential fuel cell electrocatalyst

Advancements in Bioelectricity Generation Through Nanomaterial-Modified Anode Electrodes in Microbial Fuel Cells