Abstract:The present study is on the combination of carbothermal reduction and iodination reaction (carboiodination) process for the phase reduction of ilmenite ore (FeTiO3). The aim is to understand the phase reduction and thermodynamic reaction analysis of ilmenite ore by a combined method of carbothermal-iodination using different carbon reductants (graphite and palm char). Graphite was used as a standard carbon reductant while palm char as a renewable carbon reductant was prepared via the pyrolysis technique. Ilmenite was mixed with carbon reductants and then first reduced by using a carbothermal reduction process at 1550°C. Then, the reduced samples were further investigated with iodination reaction in different temperature ranges of 900-1000 °C using a vertical tube furnace with mixed argon and iodine gas (0.2 L/min). The proximate and ultimate analyses of carbon reductants were analysed by CHON analyser and their microstructure by using SEM, while XRF and XRD were used for analyzing the chemical compositions and the phase reductions of raw ilmenite ore and reduced samples, respectively. The thermodynamics of possible reactions during carbothermal-iodination reactions were calculated by HSC Chemistry 6.0 software. By comparing graphite and palm char, palm char had an amorphous structure, with porous and high carbon content showing high potential for usage as a reductant in titanium extraction from ilmenite ore. The phases of ilmenite ore were ilmenite, rutile, and anatase transformed into rutile, pseudobrookite, and titanium oxide detected by XRD. Further reduction was performed by palm char where more rutile (TiO2) and titanium oxide (Ti3O5) developed from the iodination reaction at the highest temperature compared to graphite due to better properties and amorphous structure. The rutile and titanium oxide were found as stable phases from the thermodynamic analysis and confirmed with XRD. From the findings, the combination of carbothermal-iodination of ilmenite ore was possible and promising for rutile (TiO2) production in mineral extractions.

Reduction of Norwegian and Indian ilmenite with carbon monoxide and hydrogen gas blends

Effects of H 2 , CO, and a gas mixture on the reduction process of raw and pre-oxidized ilmenite concentrate powders

Reduction kinetics of foreign-ion-promoted ilmenite using carbon monoxide (CO) for chemical looping combustion

Effect of titanium suboxides on the reaction mechanism of hydrogen-reduced ilmenite

Investigation of the Hydrogen-Rich Reduction of Panzhihua Ilmenite Concentrate Pellets

Isothermal reduction and nitridation kinetics of ilmenite concentrate in ammonia gas

Reduction of Iron‐Ore Pellets Using Different Gas Mixtures and Temperatures

Effect of magnetite addition to ilmenite on hydrogen-rich reduction of its oxidized powder

Studies on the Reduction Behavior of Iron Oxide Pellet Fines with Hydrogen Gas: Mechanism and Kinetic Analysis

Isothermal kinetics of carbothermic reduction of ilmenite concentrate with the addition of sodium carbonate

Reduction of an Ilmenite Concentrate by Using a Novel CO2/CH4 Thermal Plasma Torch

Mineralogical Aspects of Reducing Lump Iron Ore, Pellets, and Sinter with Hydrogen

Reduction Kinetics of Fine Hematite Ore Particles with a High Temperature Drop Tube Furnace

Phase Reduction and Thermodynamic Analysis of Ilmenite Ore by Carbothermal-Iodination using Different Carbon Reductants

Effect of Sulfur on the Reduction of Ilmenite by Syngas in Chemical Looping Combustion

Thermodynamic evaluation for reduction of iron oxide ore particles in a high temperature drop tube furnace

Reduction Kinetics of Ilmenite Ore as an Oxygen Carrier for Pressurized Chemical Looping Combustion of Methane

A Laboratory Study of the Reduction of Iron Oxides by Hydrogen

Kinetic analysis of iron ore powder reaction with hydrogen—carbon monoxide

Hydrogen technologies for decarbonization of ferrous metallurgy: scientific background and technical capabilities

Investigation of (H2–H2O) partial pressure on the gas-based reduction of fine iron ore in mixed gases (H2–H2O–CO–CO2–N2)