Abstract:In this paper we present and discuss phase equilibria in the quaternary Al–Cr–Fe–Ni and the quinary Al–Co–Cr–Fe–Ni alloy systems based on experimental data from DTA/DSC, SEM/EDS, and SEM/EBSD on as-cast and isothermally annealed samples. These data as well as literature data were used for developing a new Al–Co–Cr–Fe–Ni thermodynamic description by the CALPHAD approach. Considerable efforts in this direction have been made already and commercial databases for high entropy alloys are available, e.g., TCHEA4 and PanHEA. We focus on comparing our new thermodynamic database with computations using TCHEA4 for two section planes, i.e., quaternary AlxCrFe2Ni2 and quinary AlxCoCrFeNi, where x is the stochiometric coefficient. According to our new thermodynamic description a single-phase field BCC-B2 is stable over a wider temperature range in both section planes, giving rise to dual-phase microstructures along solid state phase transformation pathways. In the section plane AlxCoCrFeNi the two-phase field BCC-B2 + σ predicted by the new database is stable between 600 and 800°C, while in TCHEA4 this phase field extends to nearly 1000°C. Furthermore, our new database showed that the solidification interval with primary BCC-B2 phase in quinary as well as quaternary section planes is narrow, being in a good agreement with presented micro-segregation measurements. Additionally, computed phase fields and phase-field boundaries in the quinary section plane correspond well to the experimental results reported in the literature.

Thermodynamic evaluation of pure Co for the third generation of thermodynamic databases

CALCULATION OF THERMODYNAMIC PROPERTIES OF HELIUM-3 BETWEEN 1K AND 100 K

Third Generation Calphad for Key Elements

From Zero Kelvin Upwards: Thermodynamic Modeling of the Mn-Ni System with Third Generation Calphad Models

Phase Equilibria in the Al–Co–Cr–Fe–Ni High Entropy Alloy System: Thermodynamic Description and Experimental Study

Experimental Investigation and Thermodynamic Calculations of the Co-Fe-Ti System

First-Principles Calculations of Elastic and Thermodynamic Properties for Multi-component Co-based Superalloys

Experimental study and thermodynamic modeling of the Al-Co-Cr-Ni system

Experimental investigation and thermodynamic modeling of the Mo-Co-B ternary system

Development and Applications of a Thermodynamic Database for Multicomponent Cu Alloys

Third-Generation Thermodynamic Descriptions for Ta-Cr and Ta-V Binary Systems

Thermodynamic and diffusion kinetic studies of the Co-Al–Fe system

New Evaluation of the Thermodynamics Stability for Bcc-Fe.

Thermo-mechanical fedamo based calculations of hea (Fe-Ni-Cx (X=0.3-0.5) ternary alloys system using Calphad method

First-principles calculations, experimental study, and thermodynamic modeling of the Al-Co-Cr system

Critical assessment of Co-Cu phase diagram from first-principles calculations

A Third Generation Calphad Description of Pure Lithium

Revisiting first-principles thermodynamics by quasiharmonic approach: Application to study thermal expansion of additively-manufactured Inconel 625

Critical Evaluation and Thermodynamic Optimization of the Cr–P and Cr–Fe–P Systems

First-Principles Calculations and CALPHAD Modeling of Thermodynamics

Thermodynamic Descriptions of the Quaternary Mg–Al–Zn–Sn System and Their Experimental Validation