Abstract:The maximization of the mixing entropy with the optimal range of enthalpy in high-entropy alloys (HEAs) can promote the formation of a stable single solid-solution phase with the absence of competing intermetallic compounds. The resultant effects, such as lattice distortion, can contribute to excellent mechanical properties, which has motivated numerous efforts to develop and design single-phase HEM. However, challenges still remain, particularly on quantifying the lattice distortion and relating it to materials properties. In this study, we have developed a NbTaTiV refractory HEA with a single body-pcentered-cubic (BCC) structure using an integrated experimental and theoretical approach. The theoretical efforts include thermodynamic modeling, i.e., CALculation of PHAse Diagram (CALPHAD). The microstructural evolutions have been investigated by systematic heat-treatment processes. The typical dendrite microstructure was observed, which is caused by the elemental segregation during the solidification in the as-cast condition. The structural inhomogeneity and chemical segregation were completely eliminated by the proper homogenization treatment at 1200 degrees C for 3 days. The homogeneous elemental distribution was quantitatively verified by the Atom Probe Tomography (APT) technique. Importantly, results indicate that this HEA exhibits the high yield strength and ductility at both room and high temperatures (up to 900 degrees C). Furthermore, the effects of the high mixing entropy on the mechanical properties are discussed and quantified in terms of lattice distortions and interatomic interactions of the NbTaTiV HEA via first-principles calculations. It is found that the local severe lattice distortions are induced, due to the atomic interactions and atomic-size mismatch in the homogenization-treated NbTaTiV refractory HEA. (C) 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Fracture properties of a refractory high-entropy alloy: In situ micro-cantilever and atom probe tomography studies

Fracture of Void-Embedded High-Entropy-Alloy Films: A Comprehensive Atomistic Study

Ductile and brittle crack-tip response in equimolar refractory high-entropy alloys

Probing deformation behavior of a refractory high-entropy alloy using in situ neutron diffraction

Intrinsic factors responsible for brittle versus ductile nature of refractory high-entropy alloys

Solving oxygen embrittlement of refractory high-entropy alloy via grain boundary engineering

Hierarchical toughening mechanisms in face centered cubic CoCrFeMnNi high-entropy alloy at room temperature and cryogenic temperatures

Fracture Toughness Investigations of an Ion‐Irradiated Nanocrystalline TiZrNbHfTa Refractory High‐Entropy Alloy

Edge Dislocations Can Control Yield Strength in Refractory Body-Centered-Cubic High Entropy Alloys

Unveiling the atomic-scale origins of high damage tolerance of single-crystal high entropy alloys

Enhanced ductility in hot compression tests by tailoring microstructure in the refractory high-entropy alloys MoNbTaTiV Zr

Microstructure and mechanical properties of the TiZrNbMoTa refractory high-entropy alloy produced by mechanical alloying and spark plasma sintering

In-situ study of room temperature tensile deformation of a CrMnFeCoNi high-entropy alloy

Remarkably high fracture toughness of HfNbTaTiZr refractory high-entropy alloy

Compressive vs. tensile yield and fracture toughness behavior of a body-centered cubic refractory high-entropy superalloy Al 0.5 Nb 1.25 Ta 1.25 TiZr at temperatures from ambient to 1200°C

A Study of the Structure and Mechanical Properties of Nb-Mo-Co-X (X = Hf, Zr, Ti) Refractory High-Entropy Alloys

Deformation mechanisms and their role in the lack of ductility in the refractory-based high entropy alloy AlMo0.5NbTa0.5TiZr

Microstructures and mechanical properties of TiZrHfNbTaWx refractory high entropy alloys

Lattice Distortion in a Strong and Ductile Refractory High-Entropy Alloy

Influence of Grain Size on Mechanical Properties of a Refractory High Entropy Alloy under Uniaxial Tension

Lattice‐Distortion‐Enhanced Yield Strength in a Refractory High‐Entropy Alloy