Abstract:The processing, particularly, etching of brittle, hard, and anti-corrosion materials represented by the third-generation wide bandgap semiconductor silicon carbide (SiC), is a significant challenge. Although SiC has excellent electrical, mechanical, and chemical properties, the difficulty of processing limits its application in various sensor devices. To solve this problem, in this study, an integrated processing method of femtosecond laser-assisted SiC dry etching is proposed, which realizes high surface quality and high rate etching of the SiC microstructure. Specifically, the effects of different laser processing parameters on the processing effect were first studied through orthogonal experiments. Experiments indicate that compared with laser power and laser scan times, laser processing speed has a more obvious impact on the processing effect. Subsequently, considering the elastic modulus anisotropy of SiC, a 5MPa piezoresistive pressure sensor chip was designed. Using the proposed composite processing method, a chip sensitive diaphragm was obtained. The diaphragm thickness and diameter are 76 μm and 1700 μm respectively. The overall sensor chip dimension was 4000 μm × 4000 μm × 350 μm. Static tests demonstrated that the sensor have excellent performance with sensitivity of 6.8 mV/MPa, linearity of 0.69% FS, and repeatability of 0.078% FS. In addition, by designing high-temperature packaging, the sensor achieved a pressure test at 400 °C. This study verifies the feasibility of the composite processing method, realizes the fabrication and measurement of high-temperature pressure sensors, and provides a reference for the micro-and nanostructure processing of various SiC sensors.

Fabrication of All-SiC Fiber-Optic Pressure Sensors for High-Temperature Applications

All-SiC Fiber-Optic Sensor Based on Direct Wafer Bonding for High Temperature Pressure Sensing

All-SiC Fiber-optic Sensor for Pressure and Temperature Dual-mode Sensing in Harsh Environments

Femtosecond Laser Processing Assisted SiC High-Temperature Pressure Sensor Fabrication and Performance Test

Fabrication of 4H-SiC piezoresistive pressure sensor for high temperature using an integrated femtosecond laser-assisted plasma etching method

Design and Fabrication of a High Temperature Pressure Sensor

High-Consistency Optical Fiber Fabry–Perot Pressure Sensor Based on Silicon MEMS Technology for High Temperature Environment

Comparison of Measurements with Finite-Element Analysis of Silicon-Diaphragm-Based Fiber-Optic Fabry–Perot Temperature Sensors

High-temperature fiber-tip pressure sensor

A MEMS-Based High-Fineness Fiber-Optic Fabry–Perot Pressure Sensor for High-Temperature Application

Fabrication of SiC Sealing Cavity Structure for All-SiC Piezoresistive Pressure Sensor Applications

Exploring the nonlinear piezoresistive effect of 4H-SiC and developing MEMS pressure sensors for extreme environments

Mass Fabrication of 4H-Sic High Temperature Pressure Sensors by Femtosecond Laser Etching

All-silicon dual-cavity fiber-optic pressure sensor with ultralow pressure-temperature cross-sensitivity and wide working temperature range

Design, Fabrication, Characterization, and Application of an Ultra-High Temperature 6H-Sic Sapphire Fiber Optic Vibration Sensor

Development of a 4H-Sic Piezoresistive Pressure Sensor for High Temperature Applications

A Novel High-Sensitivity Fiber Grating Sensor for Simultaneous Measurement of Temperature and Pressure

MgO Single Crystals MEMS-Based Fiber-Optic Fabry–Perot Pressure Sensor for Harsh Monitoring

Fiber-optic Fabry-Perot sensors take the strain under high temperature

Design of 6H-Sic High Temperature Pressure Sensor Chip

Simple Fiber-Optic Sensor for Simultaneous and Sensitive Measurement of High Pressure and High Temperature Based on the Silica Capillary Tube