Abstract:Increasing demand for seafood drives the aquaculture industry to new-generation offshore aquaculture systems with high production efficiency. As a healthy, sustainable and ecological aquaculture pattern, the pile-net enclosure has been widely applied in the aquaculture industry in China. The flow field distribution and hydrodynamic characteristics are of great importance for the welfare of farmed fish and the structure safety. This paper proposes a one-way fluid-structure coupling model to examine the flow interaction with the pile-net structures. A series of physical experiments are conducted to verify the accuracy of the numerical model. Then, different configurations, pile-net at different locations and distance between upstream and downstream pile-nets are selected to estimate their influence on the flow field and hydrodynamic characteristics of pile-net structures. Results show that the net intensifies the velocity attenuation and reduces the velocity in front of the structure. The variation of vortices is affected by the downstream pile-net and the distance between twines and piles. The wake width behind the pile is barely affected by intersection angles between pile-net and flow, but the wake width behind the net increases slightly with the increase of intersection angles between pile-net and flow. Increasing the intersection angles between pile-net and flow aggravates the attenuation of downstream velocity. The computed force decreases with decreasing intersection angles between pile-net and flow. Double rows of the pile-net intensify the upstream and downstream velocity attenuation. The distance between pile-nets has little influence on downstream flow velocity. The interaction between upstream and downstream pile-net structures weakens with the increase of the distance between upstream and downstream pile-nets With this understanding, the proposed model can be further used to assess the hydrodynamic performance of the pile-net enclosure and the large offshore aquaculture platform under steady flows, oscillating flows and waves.

Numerical Simulation of Fluid Structure Interaction between Flow and Steel Pipe Pile Platform in Deep Water

Numerical Simulation of Two-Dimensional Dam Failure and Free-Side Deformation Flow Studies

Numerical Simulation on Dynamic Behaviour of Deepwater J-lay Systems

Automation of Numerical Simulation on One-way Fluid-structure Interaction of Fluid-filled Pipeline

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

Numerical Modelling of Pipe-Soil Interaction for Marine Pipelines in Sandy Seabed Subjected to Wave Loadings

Numerical investigation of dynamic soil response around a submerged rubble mound breakwater

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Coupling Analysis Of Fluid-Structure Interaction In Fluid-Filled Elbow Pipe

Simulation of impact load on ship-platform collision

Analytical method for free vibration of steel pipe piles partially submerged in water and penetrated in layered soil

Numerical Analysis for Pipeline Installation by S-Lay Method

Numerical Simulation of Bore Against Sheet-Pile Groin

Configuration Analysis of Deepwater S-Lay Pipeline

Mechanical Properties of Steel Pipe Pile in Foundation Engineering

Numerical Analysis of Form and Stress in Shallow Sea Laid Down Thin-Walled Large-Diameter Pipe

Three-dimensional Numerical Analyse on Water Flow Affected by Piers

Analysis of Dynamic Effects of Waterflow Considering Close Waterflow-structure Coupling

Numerical analysis of the fluid–structure interaction characteristics of a pontoon submerged floating tunnel

Numerical modeling of interaction between steady flow and pile-net structures using a one-way coupling model

Numerical simulation of scour effect on different types of piers