Abstract:It has been reported that the pavement performance predicted by the current mechanistic-empirical pavement design shows low or no sensitivity to subgrade and unbound layers. This issue has raised wide attention. Targeting this problem, this paper summarizes the process used by the authors to find better models of the influence of subgrade and unbound base course layers on the performance of flexible and rigid pavements. A comprehensive literature review is first conducted and the findings are categorized. It is found that the resilient modulus, permanent deformation, shear strength, and erosion are key factors. In particular, the properties that provide greater sensitivity are (1) the moisture-dependency of the modulus, shear strength, and permanent deformation; (2) stress-dependency of the modulus and permanent deformation; and (3) cross-anisotropy of the modulus. A number of unbound layer/subgrade models have been located and categorized. Three criteria are developed to identify the candidate models in terms of the degree of susceptibility, degree of accuracy, and ease of development. The first two criteria are used to evaluate the collected unbound layer/subgrade models, while associated development and implementation issues are planned as subsequent work. Two models that the authors previously developed are selected as examples to illustrate the improvement of the performance prediction, including the moisture-sensitive, stress-dependent, and cross-anisotropic modulus model for unbound layers and stress-dependent mechanistic-empirical permanent deformation model for unbound base layers. These two models are verified through laboratory tests and numerical simulations. Moreover, they are compared to their counterparts in the AASHTOWare Pavement ME Design. The advantages of accuracy and sensitivity to the operational conditions (e.g. moisture, traffic stress, and load-induced/particle-induced anisotropy) are obvious. In addition to these two models, the development of the shear strength model and erosion model are sketched. The candidate models need further development and implementation, which address issues such as hierarchical inputs, calibration/validation, and implementation. These are the on-going and planned work on this topic to better incorporate the influence of subgrade and unbound layers so as to contribute to the improvement of pavement designs.

Empirical Models for Permanent Deformation of Subgrade Soils from the Data Collected at the Pavement Subgrade Performance Study

Mechanistic-empirical Models for Better Consideration of Subgrade and Unbound Layers Influence on Pavement Performance

Evaluation of Rutting Potential of Flexible Pavement Structures Using Energy-Based Pseudo Variables

Modeling Stress-Dependent Anisotropic Elastoplastic Unbound Granular Base in Flexible Pavements

Development of a Mechanistic-Empirical Model to Predict Equilibrium Suction for Subgrade Soil

Discrete element modelling of mechanical response of crumb rubber-modified asphalt pavements under traffic loads

Characterization and prediction of permanent deformation properties of unbound granular materials for Pavement ME Design

Parametric Study of Modified Subgrade Reaction Model Using Artificial Neural Network Approach

Method Of Fatigue-Life Prediction For An Asphalt Mixture Based On The Plateau Value Of Permanent Deformation Ratio

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

Development of a Modulus of Subgrade Reaction Model to Improve Slab-Base Interface Bond Sensitivity

Mechanistic-Empirical Model to Characterize Rutting in Unpaved Road with a Shallowly Buried SRHDPE Pipe

A Mechanistic-Empirical Approach to Quantify the Influence of Geogrid on the Performance of Flexible Pavement Structures

Predicting Flexible Pavement Distress and IRI Considering Subgrade Resilient Modulus of Fine-Grained Soils Using MEPDG

A Constitutive Model for the Accumulated Strain of Unsaturated Soil under High‐cycle Traffic Loading

Predicting Postconstruction Settlements Generated by Moving Traffic on Highways Built on Soft Soil in China Using Mechanistic-Empirical Design Method

Experimental Study on Cumulative Plastic Deformation of Coarse-Grained Soil High-Grade Roadbed under Long-Term Vehicle Load

Research on Resilient Modulus Prediction Model and Equivalence Analysis for Polymer Reinforced Subgrade Soil under Dry-Wet Cycle

Development of an Artificial Neural Network-Based K-Value Prediction Model to Improve the Sensitivity of Base Layer on Rigid Pavement Performance

Methodology to evaluate performance of pavement structure using soil moisture profile

Modeling Asphalt Pavement Rutting under Accelerated Testing