Biomethane and biohydrogen production from an anaerobic sludge used in the treatment of rice parboiling effluent: Specific methanogenic and hydrogenic activity
Willian Cézar Nadaleti,Jeferson Gomes,Eduarda de Souza,Maele Santos,Paulo Belli,Armando Borges,Rodrigo Mohedano,Nelson Libardi,Flavio Manoel R da Silva,Erico Correa,Bruno Vieira
DOI: https://doi.org/10.1016/j.ijhydene.2024.01.157
IF: 7.2
2024-02-23
International Journal of Hydrogen Energy
Abstract:This study evaluated the biomethane and biohydrogen production capacity of an anaerobic sludge collected from a rice parboiling industry. Three main parameters were assess from an experimental batch with varying substrate-inoculum ratios (S/I): the final mass production, the maximum generation rate, and the reactors' biomethane and biohydrogen yield. From the analysis of the final production and the maximum generation rate, the best S/I ratios found for the methanogenic and hydrogenic reactors were, respectively, 1.4 and 3.8 gCOD/gVSS. These proportions produced 102.65 mgCH 4 /gVSS and 27.96 mgH 2 /gVSS, reaching the following maximum generation rates: 32.91 mgCOD CH 4 /gVSS.h and 12.63 mgCOD H 2 /gVSS.h. In contrast to the methanogenic microorganisms of the studied sludge, the acetogenics allow the use of higher organic loads in the systems. However, the lowest S/I ratio (0.1 gCOD/gVSS) resulted in both the best biomethane and biohydrogen production yield, around 2.33 mol CH 4 /mol glucose and 2.46 mol H 2 /mol glucose. Compared to the maximum theoretical yields, whereas the sludge produced biohydrogen more effectively under high S/I ratios, biomethane was generated more efficiently in low S/I ratios. Finally, the anaerobic sludge can be employed as a satisfactory inoculum in anaerobic digestion and dark fermentation processes designed for biomethane and biohydrogen production.
energy & fuels,electrochemistry,chemistry, physical