Abstract:Viscosity is a physical property of fluids and shows resistance to flow. In metallurgical slag, it directly affects various parameters of a metallurgical process such as reaction rate, separation effect, etc. The estimation of viscosity by models during a production process is considered to be much more effective owing to the production fluctuations and complexities of the slag composition. Many viscosity models have been developed in the past, such as the structural model with a wide range of adaptability and complex calculation process and the empirical and semiempirical models with simple structure and a narrow range of adaptability. The present paper proposed a new method to calculate the structural parameter (NBO/T) ratio (the amount of nonbridging oxygen per tetrahedral-coordinated atom), based on which the relationship between the viscosity of molten slag and (NBO/T) ratio was investigated. First, the viscosity model was applied to SiO2–ΣMxO slags, with the model parameters obtained by fitting the viscosity data of pure oxide and SiO2–MxO binary slag, and the average deviations were in the range of 9%–18.5%. Then, the model was extended to calculate the viscosity of SiO2–Al2O3–ΣMxO, a multicomponent complex aluminosilicate system, and Al2O3 was split into acid and basic oxides. Then the oxides were used for calculating the (NBO/T) ratio and viscosity activation energy based on the amphoteric behavior of Al2O3 in SiO2–Al2O3–MxO ternary slag system. Using the parameters of a SiO2–MxO binary system, the model parameters of the Al2O3-containing slag system were obtained by fitting the viscosity data of the SiO2–Al2O3–MxO ternary slag system with average deviations between 10% and 25%. In addition, the viscosity of a multi-complex system (SiO2–Al2O3–CaO–MgO–FeO–Na2O–K2O–Li2O–BaO–SrO–MnO) and its subsystems were also calculated using the model proposed in this paper, and the average deviations is less than 25%, which shows relatively accurate prediction results. The present model is based on the analysis of a slag structure and processing of data by an empirical method. This method has a better prediction effect and wider application range compared with the traditional empirical model, and it uses a simpler calculation process compared with the structure model.

Dynamic Regional Viscosity Prediction Model of Blast Furnace Slag Based on the Partial Least-Squares Regression

A Prediction Model of Blast Furnace Slag Viscosity Based on Principal Component Analysis and K-Nearest Neighbor Regression

Computational Modeling and Prediction on Viscosity of Slags by Big Data Mining

ICA-SVM-Based Modeling for Predicting Silicon Content in Blast Furnace Hot Metal

Experimental Research and Prediction Model on Viscosity of High FeO Content Slag

Intelligent predictive modeling of blast furnace system

A Novel Robust Broad Nonlinear Representation CVA Method for Monitoring Blast Furnace Iron-making Process

Comparison Of Univariate And Multivariate Predicted Method Based On Support Vector Regression For Silicon Content In Hot Metal

A modified method for calculating the viscosity of multicomponent slags based on Kriging interpolation

Structurally-based Viscosity Model for Multicomponent Slag Systems

Fundamental Research and Applications of Blast Furnace Slag

Artificial Neural Network-Based Non-Linear Modeling and Simulation of CaO-SiO2-Al2O3-MgO Blast Furnace Slag Viscosity

Quality prediction of hot metal in blast furnace using improved support vector regression

Prediction Model for Viscosity of Titanium-Bearing Slag Based on the HIsmelt Process

ANN-based structure-viscosity relationship model of multicomponent slags for production design in mineral wool

Model of estimating viscosity based on slag structure in entrained flow gasifier

Dynamic selective Gaussian process regression for forecasting temperature of molten steel in ladle furnace

Prediction on particle size characteristics of high-temperature liquid blast furnace slag in a centrifugal granulation process

A sliding-window smooth support vector regression model for nonlinear blast furnace system

Application of Least Squares Support Vector Machines to Predict the Silicon Content in Blast Furnace Hot Metal

Varying-coefficient regression model for predictive control of blast furnace hot metal temperature