Abstract:The last few decades have witnessed significant advances in the development of polymeric-based foam materials. These materials find several practical applications in our daily lives due to their characteristic properties such as low density, thermal insulation, and porosity, which are important in packaging, in building construction, and in biomedical applications, respectively. The first foams with practical applications used polymeric materials of petrochemical origin. However, due to growing environmental concerns, considerable efforts have been made to replace some of these materials with biodegradable polymers. Foam processing has evolved greatly in recent years due to improvements in existing techniques, such as the use of supercritical fluids in extrusion foaming and foam injection moulding, as well as the advent or adaptation of existing techniques to produce foams, as in the case of the combination between additive manufacturing and foam technology. The use of supercritical CO2 is especially advantageous in the production of porous structures for biomedical applications, as CO2 is chemically inert and non-toxic; in addition, it allows for an easy tailoring of the pore structure through processing conditions. Biodegradable polymeric materials, despite their enormous advantages over petroleum-based materials, present some difficulties regarding their potential use in foaming, such as poor melt strength, slow crystallization rate, poor processability, low service temperature, low toughness, and high brittleness, which limits their field of application. Several strategies were developed to improve the melt strength, including the change in monomer composition and the use of chemical modifiers and chain extenders to extend the chain length or create a branched molecular structure, to increase the molecular weight and the viscosity of the polymer. The use of additives or fillers is also commonly used, as fillers can improve crystallization kinetics by acting as crystal-nucleating agents. Alternatively, biodegradable polymers can be blended with other biodegradable polymers to combine certain properties and to counteract certain limitations. This work therefore aims to provide the latest advances regarding the foaming of biodegradable polymers. It covers the main foaming techniques and their advances and reviews the uses of biodegradable polymers in foaming, focusing on the chemical changes of polymers that improve their foaming ability. Finally, the challenges as well as the main opportunities presented reinforce the market potential of the biodegradable polymer foam materials.

Development of Bio-Based Foams Prepared from Pbat/Pla Reinforced with Bio-Calcium Carbonate Compatibilized by Electron-Beam Radiation

Development by extrusion of composite films based on Poly(Lactic Acid)/Babassu Mesocarp Flour

Effect of organoclay and corn straw on the properties of poly (butylene adipate-co-terephthalate) (PBAT) hybrid composites

Flat biofilms extrusion of poly(lactic acid)/poly(butylene adipate‐co‐terephthalate) grafted with glycidyl methacrylate blends: Toward ecological packaging for sustainability

Micro fibrillated cellulose reinforced bio-based rigid high-density polyurethane foams

Super toughened blends of poly(lactic acid) and poly(butylene adipate- co -terephthalate) injection-molded foams via enhancing interfacial compatibility and cellular structure

PBAT/organoclay composite films: preparation and properties

Study of Mechanical and Thermal Properties of Environmentally Friendly Composites from Beer Bagasse

A Novel PLA High Oxygen Barrier Multilayer Film/foam

Investigation of the mechanical, thermal and wear properties of eggshell/PLA composites

Preparation of Biodegradable PBST/PLA Microcellular Foams under Supercritical CO2: Heterogeneous Nucleation and Anti-Shrinkage Effect of PLA

3D Printing of Biopolymer Composites Investigation on Effect of Egg Shell Particles on Polylactic Acid Matrix

Polybutylene adipate terephthalate/polylactic acid interface enhanced compatibilization and its bead-foaming characteristics

Foaming of 3D-Printed PLA/CaCO3 Composites by Supercritical CO2 Process for Sustainable Food Contact Materials

Bionanocomposites of PLA/PBAT/organophilic clay: preparation and characterization

Forefront Research of Foaming Strategies on Biodegradable Polymers and Their Composites by Thermal or Melt-Based Processing Technologies: Advances and Perspectives

Effect of Operational Variables on Supercritical Foaming of Caffeic Acid-Loaded Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Blends for the Development of Sustainable Materials

Extrusion foaming of Poly(lactic acid)/Rice straw composites: Opposing effects of eco-friendly physical/chemical treatment and compatibilization methods

Biobased Immiscible Polylactic Acid (PLA): Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Blends: Impact of Rheological and Non-isothermal Crystallization on the Bead Foaming Behavior

Compatibilization of poly(butylene adipate-co-terephthalate)/polylactic acid blends by gamma radiation

Ecofriendly composites based on poly (lactic acid) with nano-zirconium phosphate and nano-zinc oxide/zirconium phosphate: physicochemical and aging characteristics