Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Solution Processable Metal Oxide Thin Film Deposition and Material Growth for Electronic and Photonic Devices

Ultra-high Precision Nano Additive Manufacturing of Metal Oxide Semiconductors Via Multi-Photon Lithography

Solution Processed Metal Oxide High-κ Dielectrics for Emerging Transistors and Circuits

ZnO-based Semiconductors and Structures for Transistors, Optoelectronic Devices and Sustainable Electronics

Solution processed zirconium oxide dielectric thin films for electronic applications

Nickel oxide thin films grown by chemical deposition techniques: Potential and challenges in next‐generation rigid and flexible device applications

Progress of solution-processed metal oxides as charge transport layers towards efficient and stable perovskite solar cells and modules

Editorial: High-Performance Organic Thin-Film Transistors

Concepts, fabrication and applications of MOF thin films in optoelectronics: A review

Atomic Layer Deposition for Nanoscale Oxide Semiconductor Thin Film Transistors: Review and Outlook

Trends in Low‐Temperature Combustion Derived Thin Films for Solution‐Processed Electronics

Advances in Liquid Metal Printed 2D Oxide Electronics

Colloidal metal oxide nanocrystals as charge transporting layers for solution-processed light-emitting diodes and solar cells

Advancements in Metal Oxide Thin Film Quality in Solution-Processed High-κ Dielectrics for High-Performance Transistors

Patterning optically clear films: Coplanar transparent and color-contrasted thin films from interdiffused electrodeposited and solution-processed metal oxides

Review on Atomic Layer Deposition and Applications of Oxide Thin Films

2D Oxides for Electronics and Optoelectronics

State of the art, trends, and opportunities for oxide epitaxy

Recent advances in the fabrication of 2D metal oxides

Solution-processed metal-oxide thin-film transistors: a review of recent developments

Revisiting Solution-Based Processing of van der Waals Layered Materials for Electronics