Abstract:The accurate and rapid detection of persulfate concentration is important for environmental decontamination and human health protection. In this work, a novel self-powered electrochemical sensor for the sensitive monitoring of persulfate was developed, which utilized cobalt tetroxide (Co3O4@CC) or tin-doped cobalt tetroxide (SnxCo3-xO4@CC) cathode as the sensing element and anode with electrogenic microorganisms as the power supplier. The Co3O4@CC and SnxCo3-xO4@CC electrodes were fabricated by in situ growing nanostructured Co3O4 or SnxCo3-xO4 catalysts on carbon cloth. Electrochemical tests revealed that these electrodes exhibited excellent catalytic reduction performance toward persulfate because of the synergistic catalysis by Co3O4 and electrode electrons, well-exposed Co2+/Co3+ catalytic sites, and high electron transfer efficiency. Tin doping could enhance the catalytic persulfate reduction by improving the conductivity and electron transfer of the Co3O4 catalyst. The electrode prepared at a hydrothermal temperature of 90 °C and a tin dosage of 0.286 g·cm-2 achieved the highest persulfate reduction activity under pH 7. The sensing properties of the self-powered sensors toward persulfate were explored in detail. Results showed that under the optimal external load of 300 Ω, the proposed sensor could display a broad detection range of 0 to 1500 μmol L-1 K2S2O8 with sensitivities of 1.13 and 0.12 μA μmol-1 L, a detection limit of 1.11 μmol L-1 (S/N = 3), and a fast response time within 30 s. The sensors also presented satisfactory reproducibility and selectivity during the detection of persulfate. The proposed sensor will provide a new approach for sensitive, on-site, and real-time monitoring of persulfate for a wide range of applications.

Determination of Sulfate in Seawater by a Novel All-Solid-State Sulfate Sensor with H2SO4 Doped Polyaniline as Sensitive Membrane

A Miniature All-Solid-State Calcium Electrode Applied to in Situ Seawater Measurement

An All-Solid-State Ammonium Ion-Selective Electrode Based on Polyaniline As Transducer and Poly (O-Phenylenediamine) As Sensitive Membrane

All-Solid-State Carbonate-Selective Electrode Based on Screen-Printed Carbon Paste Electrode

An All-Solid-state Ion-Selective Electrode with Ag3AsO4 As the Sensitive Membrane for Detecting Arsenate in Aqueous Environments

Doped PANI Coated Nano-Ag Electrode for Rapid In-Situ Detection of Bromide in Seawater

An All-Solid-State Silicate Ion-Selective Electrode Using PbSiO3 As a Sensitive Membrane

Designing Cu2+ As a Partial Substitution of Protons in Polyaniline Emeraldine Salt: Room-Temperature-Recoverable H2S Sensing Properties and Mechanism Study

Characterization and Calibration of Sulphate ISE with Complex Membrane as Ionophore

A novel all-solid-state ammonium electrode with polyaniline and copolymer of aniline/2,5-dimethoxyaniline as transducers

A Novel Chemical Sensor with Multiple All-Solid-state Electrodes and Its Application in Freshwater Environmental Monitoring.

Polyaniline Langmuir–Blodgett film modified glassy carbon electrode as a voltammetric sensor for determination of Ag+ ions

Solid-state potentiometric H2S sensor combining NASICON with Pr6O11-doped SnO2 electrode

New All-Solid-state Carbonate Ion-Selective Electrode with Ag 2 CO 3 -Baco 3 As Sensitive Films

The study of PVP/Pd/IrO2 modified sensor for amperometric determination of sulfur dioxide

Polyaniline/CuO Nanoparticle Composites for Use in Selective H 2 S Sensors

Ultrasensitive Pb(II) Potentiometric Sensor Based on Copolyaniline Nanoparticles in a Plasticizer-Free Membrane with a Long Lifetime

Combinatorial Screening of Potentiometric Pb(II) Sensors from Polysulfoaminoanthraquinone Solid Ionophore.

Hydrogen Bond-Based Macrocyclic And Tripodal Neutral Ionophores For Highly Selective Polymeric Membrane Sulfate-Selective Electrodes

Sensitive detection of persulfate by a novel self-powered electrochemical sensor with carbon cloth electrodes modified with tin-doped cobalt tetroxide

Superhydrophobic Polyaniline Solid Contact for Potential Stability Improvement of NH4+-selective Electrode