Abstract:It is considered that corrosion of biodegradable implants causes the release of metal ions from the implant surface, leading to tissue inflammation and subsequent failure of the implant. The alloying composition of the material, as well as the surface features of the material, determines the rate of implant degradation. The present study analyzed the influence of the Wire Electrical Discharge Machining (WEDM) process parameters on the rate of material removal, the surface characteristics, and the rate of corrosion of the ZE41A Mg alloy. Weighing samples after one week of immersion in simulated body fluid (SBF) determined the corrosion rate. The experiments were conducted using a Taguchi L 16 orthogonal array (OA). WEDM is a method of spark erosion that affects the surface characteristics of magnesium alloy samples by developing overlapping craters and surface oxides that affect the mineralization process. The discharge energy has a significant effect on the response characteristics of the WEDM process, namely rate of material removal (MRR), surface roughness (SR), and corrosion rate (CR), and a trade-off between these response properties is always required to achieve the best performance for biodegradable Mg-alloy implants. As a consequence, grey relational analysis (GRA) was employed to optimize MRR, SR, and CR simultaneously. The study discusses the significance of machining process parameters with the degradation behavior of biomedical implant materials in a simulated body fluid (SBF). According to the current study, the most influential parameters in multi-objective optimization are the I p and T on . ZE41A Mg alloy machined samples at optimum WEDM parameters enhanced performance in reduced surface roughness and low in- vitro corrosion rate for ZE41A Mg-alloy. By optimization, the mechanical integrity loss of bone design can be mitigated in relation to bone fracture healing time.

WEDM of Mg/CRT/BN composites: Effect of materials and machining parameters

Effect of Al7075 and Activated Carbon reinforced Composite on Optimizing WEDM Responses

Investigation of Machining Rate and Surface Roughness in Wire EDM of Al6063/WC/ZrO2 Composite using Response Surface Methodology

Analysis of Wire-cut Electric Discharge Machining Behaviour of AA6061 / C / ZrO2 Hybrid Nano Composites using Taguchi's method

Experimental investigation to assess the surface integrity in WEDM of Al-based hybrid composite material

Investigation on Electrical Discharge Machining Parameters of Aluminium7075/Boron Carbide/Titanium Diboride Hybrid Composites by Grey Relational Analysis

Enhancing WEDM performance on Mg/FeCoCrNiMn HEA composites through ANN and entropy integrated COCOSO optimization

Experimental investigation, modeling and optimization of wire EDM process parameters for machining AA2024-B4C self-lubricating composite

Experimental investigation on WEDG machining parameters for tungsten carbide

Characterization of cast rare earth WE43 magnesium alloy and parameter optimization for wire electrical discharge machining using TOPSIS & COPRAS

Predictive modelling and optimization of WEDM parameter for Mg-Li alloy using ANN integrated CRITIC-WASPAS approach

A Hybrid Design of Experiment Approach in Analyzing the Electrical Discharge Machining Influence on Stir Cast Al7075/B4C Metal Matrix Composites

Process parameters optimization of EDM for hybrid aluminum MMC using hybrid optimization technique

Synthesis and Characterization of Mechanical Properties and Wire Cut EDM Process Parameters Analysis in AZ61 Magnesium Alloy + B4C + SiC

Investigating and Multi-Objective Optimizing WEDM Parameters for Al6061/Mg/MoS2 Composites Using BBD and NSGA-II

Optimization of EDM Machining of High Carbon High Chromium Steel Using Zirconium and Nickel Powder Mixed Dielectric by Grey Relational Analysis

Grey Relational Analysis based Multiresponse Optimization for WEDM of ZE41A Magnesium Alloy

Optimization of wire electrical discharge machining process parameters on Inconel 690 superalloy via Taguchi technique

Use of RSM Desirability Approach to Optimize WEDM of Mild Steel

Investigation of aluminum alloy 6061 in Wire-EDM regarding surface roughness and material removal rate by adopting optimization techniques

Optimizing Wire Electrical Discharge Machining Parameters for Enhanced Gear Machining Performance: A Machine Learning Approach on 20MnCr5 Steel