Abstract:Degradative cracking, more commonly known as "environmental stress cracking" (ESC) has been observed in many implanted polyetherurethane elastomers. This phenomenon has been attributed to biochemical and cellular interactions at the surface of the implanted material causing polymer chain cleavage. This may result in surface fissuring followed by the deep cracking associated with considerable biodegradation of the polymer, resulting in loss of mechanical strength and the formation of aneurysms in an in vivo situation. These cracking effects are believed to be due to mechanical stress combined with the oxidising actions of macrophages and giant cells, as surface cracking has been observed to occur directly under adherent macrophages on a polyetherurethane implant. These cells form part of the body's immune response which uses enzymes and reactive oxygen species (02, 02, HO* and H 2 O 2 ) to degrade foreign material. We describe a modification of an in vitro test method developed by Zaho et al. [1] using glass wool and a Hydrogen Peroxide/Cobalt (II) Chloride (H 2 O 2 /CoCl 2 ) mixture to replicate the oxidising effects of macrophages in vivo. The modifications were made to establish a routine testing system for resistance to biodegradation which could be used to screen a range of polymers designed for use in microporous vascular grafts. The grafts are pre-stressed by a method devised by Stokes et al. [2] where each graft is stretched to a predetermined elongation over a mandrel and the strain is fixed by tying PTFE tape around each end of the mandrel. Initial comparative testing used two materials fabricated into vascular grafts with identical dimensions and an interior diameter of 5 mm. The first, a polyetherurethane-Estane 5714 F1 (BF Goodrich Specialty Plastics UK Ltd.), showed the in vitro test method to have an acceleration factor of approximately nine times over in vivo trials resulting in catastrophic failure during the sixth week. The second material, a new generation polycarbonate-based polyurethane, Chrono Flex (Cardio Tech International Ltd.), displayed outstanding resistance against environmental stress cracking, maintaining its structure throughout the entire test period of thirty-five weeks. These results will be followed up with long-term in vivo implantation studies to corroborate these findings.

Resistance to Biodegradative Stress Cracking in Microporous Vascular Access Grafts

PS220. Thermo-Mechanical Resistance of a Nanocomposite Polymer Exposed to Simulated in Vivo Hydrodynamic Fatigue for Ten Years in Development of a Sutureless Endovascular Stent Graft

Long-term in vivo alterations of polyester vascular grafts in humans

Cytocompatibility Evaluation of a Novel Series of PEG-Functionalized Lactide-Caprolactone Copolymer Biomaterials for Cardiovascular Applications

Development of a microporous compliant small bore vascular graft

Manufacture of small calibre quadruple lamina vascular bypass grafts using a novel automated extrusion-phase-inversion method and nanocomposite polymer

Experimental Investigation on the Properties of Poly (l‐lactic Acid) Vascular Stent after Accelerated in Vitro Degradation

Temporal Changes in the Surface Chemistry and Topography of Reactive Ion Plasma-Treated Poly(vinyl alcohol) Alter Endothelialization Potential

Accelerated In Vitro Oxidative Degradation Testing of Ultra-High Molecular Weight Polyethylene (UHMWPE)

Tissue engineered vascular grafts are resistant to the formation of dystrophic calcification

Effects of Long Term Fatigue Cycling on In Situ Fenestrations of Polyethylene Terephthalate and Expanded Polytetrafluorethylene Thoracic Aortic Stent grafts: An Experimental Study

Degradation behavior of 2D auxetic structure with biodegradable polymer under mechanical stress

The effect of autoclave resterilisation on polyester vascular grafts

Physical Characteristics of Knitted Polyester Vascular Prostheses:Can the Wall Be Considered As a Scaffold for Tissue Regeneration?

In vitro degradation of fibrous bilayer poly-L-lactic acid scaffolds

Fabrication of Vascular Grafts Using Poly(ε-Caprolactone) and Collagen-Encapsuled ADSCs for Interposition Implantation of Abdominal Aorta in Rhesus Monkeys

Hard Block Degradable Polycarbonate Urethanes: Promising Biomaterials for Electrospun Vascular Prostheses

Experimental Studies on Preparation of the Porous and Small-Diameter Poly(ε-Caprolactone) External Vascular Scaffold and Its Degradability and Biocompatibility

Comparison of clinical explants and accelerated hydrolytic aging to improve biostability assessment of silicone-based polyurethanes

Degradation and Characterisation of Electrospun Polycaprolactone (PCL) and Poly(lactic-co-glycolic acid) (PLGA) Scaffolds for Vascular Tissue Engineering

Autonomic healing of polymer composites