Degradation behavior of 2D auxetic structure with biodegradable polymer under mechanical stress

Dandan Dou,Dongpei Guo,Yanzhu Shi,Yinghui Li,Xuezheng Geng,Lizhen Wang,Yubo Fan

DOI: https://doi.org/10.1016/j.jmbbm.2023.106089

Abstract:Coronary heart disease is serious harm to human health. Vascular scaffold implantation is the main treatment. Biodegradable polymers are widely used in vascular scaffolds for good biodegradability and biocompatibility. However, whether the mechanical properties and radial expansion ability can successfully implant the scaffold without acute elastic retraction remains to be further studied. Because of the unique deformation mechanism, shear resistance, and resilience, auxetic structures can effectively avoid the restenosis of degraded vascular scaffolds. Firstly, the plane isotropic and plane anisotropic auxetic structural scaffolds were designed. The control structures (traditional structures) scaffolds were taken as the contrast. PCL was used to prepare the vascular auxetic by 3D printing. The printing parameters of fused deposition 3D printing, such as printing temperature, printing speed, and printing pressure, were studied to determine the optimal printing parameters of PCL. A self-assembled cyclic tensile stress loading device was used to investigate the degradation behavior of different scaffolds under different sizes of cyclic tensile stress, such as surface morphology, pH changes, mass loss rate, and mechanical properties. The increase of stress, surface roughness, and mass loss rate of the scaffolds all showed an increasing trend. pH gradually decreased from the fifth week, and the decrease was proportional to the stress. A large level of stress loading intensifies the decline of elastic modulus and the ultimate strength of the scaffold. In conclusion, the increase of periodic tensile stress will accelerate the degradation of scaffolds, and the degradation behavior of scaffolds with different configurations is different. The degradation rate of dilatant scaffolds was higher than that of control scaffolds, and the degradation rate of anisotropic auxetic scaffolds was higher than that of isotropic auxetic scaffolds, which provides a theoretical reference for the application of auxetic structure in the degradation of vascular scaffolds.