Abstract:Previous research has indicated that many European buildings are vulnerable to moderate-magnitude earthquakes. For example, during the L´Aquila (Italia, Mw 6.3, 2009) and Lorca (Spain, Mw 5.9, 2011) earthquakes, many old buildings were severely damaged and some of them collapsed. In specific, significant damage has been found in several school buildings after past earthquakes in Europe. This is due to the fact that many of them were constructed prior to the current seismic codes, thus considering only gravitational loads and with no seismic design whatsoever. Primary schools are even more vulnerable than other typologies because of their low adult/child ratio. The seismic activity of the Iberian Peninsula is low-moderate. However, the Algarve and Huelva regions, which are situated in the south-west, are influenced by large faults which have caused major earthquakes of long-return periods. The European project PERSISTAH (Projetos de Escolas Resilientes aos SISmos no Território do Algarve e de Huelva, in Portuguese) aims to cooperatively evaluate the seismic vulnerability of primary schools in the Algarve (Portugal) and Huelva (Spain) regions. The present work is framed under this project. The objective of this paper is to determine the most effective retrofitting scheme for a typical primary school building in this area, considering structural, architectural and constructive parameters. The scheme could be applied to several buildings of the same typology, decreasing costs and time. An existing reinforced concrete frame building has been selected for the study. This is one of the most commonly used typologies for primary schools in this area. A nonlinear static analysis has been carried out in order to study its seismic behaviour. The performance point of the building has been obtained through the capacity-demand spectrum method. The preliminary results have confirmed the poor seismic behaviour of this building. Specifically, soft-story behaviour has been identified in the ground floor and short columns have been observed in the upper floors. Therefore, specific seismic retrofitting solutions have been proposed and evaluated in order to identify the one that is the most efficient. The combination of reinforcements has been done considering the structural and architectural impact and constructive parameters. The calculations have shown that steel X-bracings are the best solution for preventing the formation of a soft-storey in the ground floor. Unfortunately, this scheme increases the deformation in the upper floor columns. The best solution for the upper floors' short columns has been the use of steel jackets. The results have also shown that this combination produces an important reduction of the expected general damage level. The resulting retrofitting scheme can be extrapolated to other buildings with a similar typology.

Optimal seismic upgrading of a reinforced concrete school building with metal-based devices using an efficient multi-criteria decision-making method

Genetic Algorithm-Based Optimization Procedure for the Seismic Retrofitting of Existing Masonry Structures

Seismic Vulnerability Assessment of Historical Centers at Urban Scale

Assessment of Multi-Criteria Evaluation Procedures for Identification of Optimal Seismic Retrofitting Strategies for Existing RC Buildings

Understanding the Impact of Seismic Hazard and Climate Conditions on Multi Criteria–Based Retrofitting of Existing Buildings

Specific seismic retrofitting of a compact reinforced concrete building with X-bracings and steel jackets. Application to a primary school in Huelva

Seismic retrofitting of masonry infilled RC buildings in low-to moderate-seismic regions: case study of typical Sri Lankan school buildings

Parametric study on the in-plane performance of a steel frame retrofit solution for URM buildings using DEM

Seismic Retrofitting of Existing Industrial Steel Buildings: A Case-Study

Seismic performance of an existing RC structure retrofitted with buckling restrained braces

Seismic performance assessment of deficient RC structures retrofitted with different steel bracing systems

Seismic strengthening of isolated RC framed structures through orthogonal steel exoskeleton: Bidirectional non-linear analyses

Seismic assessment and dissipative bracing retrofit-based protection of infills and partitions in RC structures

Seismic out-of-plane retrofit of URM walls using timber strong-backs

A multi-objective optimization framework for seismic resilience enhancement of typical existing RC buildings

Raising the bar in seismic design: cost–benefit analysis of alternative design methodologies and earthquake-resistant technologies

BIM-based approach for seismic vulnerability analysis: A case study

Seismic Retrofit of Reinforced Concrete Frame Buildings with Hysteretic Bracing Systems: Design Procedure and Behaviour Factor

Experimentally Verified Retrofit Combining Hybrid Solutions for Enhancing the Seismic Response of Multistory RC Structures

Seismic Retrofitting of Existing Reinforced Concrete Buildings Using Aluminium Shear Links and Eccentric Steel Chevron Braces

A design method for seismic retrofit of reinforced concrete frame buildings using aluminum shear panels