Abstract:Acoustic velocities for natural gas are calculated as a function of temperature, pressure, and gas gravity. The method is based on a generalized equation of state for natural gas that may also be used to calculate a number of thermodynamic properties such as specific internal energy and isentropic expansion. Introduction Some uses of acoustic velocities for natural gas are to determine liquid levels in gas wells and to locate hydrate freezes, lost ‘pigs’, or other obstructions in gas pipelines. These distances can be calculated from well defined acoustic records (Fig. 1a) by associating the number of pipe sections with their corresponding lengths. If, however, an uninterpretable acoustic record (Fig. 1b) is obtained, or if the lengths of the pipe sections of a given flow string are unknown, pipe sections of a given flow string are unknown, distance between the shot deflection and the reflecting surface can be obtained by integrating the relationship between velocity distance and time (1) The utility of this technique depends upon one's ability to calculate acoustic velocities and to measure system variables such as gas gravity or composition, temperature, temperature gradient and pressure. In the past, acoustic velocities have been calculated from an approximate relationship involving atmospheric heat capacity ratios rather than ratios that are a function of pressure. As has been pointed out, this approximate relationship provides a good working equation for calculating acoustic velocities at low pressure ranges but should not be used at higher pressures. The purpose of this work is to present a method for rigorously calculating acoustic velocities for natural gas over a broad range of temperatures, pressures and gas gravities. Calculation of Acoustic Velocity Starting from the equation for the speed of sound in a compressible fluid (2) it is possible to derive the following equation for a real gas (see Appendix). (3) Eq. 3 can also be expressed in terms of the isentropic expansion coefficient, n, since (4) Making this substitution yields (5) To compute the velocity of sound in a real gas from either Eq. 3 or Eq. 5, it is necessary to know the PVT behavior of the gas and the variation of the beat capacity ratio with temperature and pressure. To accomplish this, an equation of state for natural gas was developed. JPT P. 889

Density, speed of sound and derived thermodynamic properties of a synthetic natural gas

Measurements of Speed of Sound in Lean and Rich Natural Gas Mixtures at Pressures up to 37 MPa Using a Specialized Rupture Tube

Speed of sound data, derived perfect-gas heat capacities, and acoustic virial coefficients of a calibration standard natural gas mixture and a low-calorific H2-enriched mixture

Speed of sound data, derived perfect-gas heat capacities, and acoustic virial coefficients of a calibration standard natural gas mixture and a low-calorific $H_{2}$-enriched mixture

Novel natural gas molecular weight calculator equation as a functional of only temperature, pressure and sound speed

Thermophysical Properties of Natural Gas Components: Apparatus and Speed of Sound in Argon

Speeds of sound in a natural gas of specified composition at the temperature 255 K and pressures in the range 64 kPa to 6.1 MPa

Speeds of sound for a biogas mixture $CH_{4}$ + $N_{2}$ + $CO_{2}$ + $CO$ from $p$ = (1-12) MPa at $T$ = (273, 300 and 325) K measured with a spherical resonator

Speed of sound for three binary ($CH_{4}$ + $H_{2}$) mixtures from $p$ = (0.5 up to 20) MPa at $T$ = (273.16 to 375) K

The speed of sound in two methane-rich gas mixtures at temperatures between 250 K and 350 K and at pressures up to 20 MPa

Accurate experimental ($p$, $ρ$, $T$) data of natural gas mixtures for the assessment of reference equations of state when dealing with hydrogen-enriched natural gas

Brillouin Scattering Study of Liquid Methane under High Pressures and High Temperatures

Speed of sound measurements in (carbon monoxide + ethane) and (carbon monoxide + propane) gas mixtures at T = (260 to 350) K and up to 12 MPa

SPEED OF SOUND DATA AND RELATED MODELS FOR MIXTURES OF NATURAL GAS CONSTITUENTS.

Investigation on Vapor–Liquid Equilibrium of (Argon + Methane) at the Temperature Range of (95 to 135) K

Determination of Acoustic Velocities for Natural Gas

Speed of Sound Measurements Using a Cylindrical Resonator for Gaseous Carbon Dioxide and Propene

Measurements and PR EoS Modeling of Thermophysical Properties at Vapor-Liquid Equilibrium Conditions for Natural Gas Condensate/Live Bitumen Mixtures

Calculation of the Thermodynamic Properties of Methane up to 30 MPa Using a New Equation of State with Regular and Scale Parts and Few Constants

Density Data of Two (H2 + CO2) Mixtures and a (H2 + CO2 + CH4) Mixture by a Modified Burnett Method at Temperature 673 K and Pressures Up to 25 MPa

Density Measurements on Binary Mixtures (nitrogen + Carbon Dioxide and Argon + Carbon Dioxide) at Temperatures from (298.15 to 423.15) K with Pressures from (11 to 31) MPa Using a Single-Sinker Densimeter