Abstract:Semi-solid thixoforming processes rely on a material microstructure made of globular solid grains more or less connected to each other, thus developing a solid skeleton deforming into a liquid phase. During processing, the material structure changes with the processing history due to the agglomeration of the particles and the breaking of the grains bonds. This particular evolutive microstructure makes semi-solid materials behave as solids at rest and as liquids during shearing, which causes a decrease of the viscosity and of the resistance to deformation while shearing. Thixoforming of aluminum and magnesium alloys is state of the art and a growing number of serial production lines are in operation all over the world. But there are only few applications of semi-solid processing of higher melting point alloys such as steel. This can partly be attributed to the high forming temperature combined with the intense high temperature corrosion that requires new technical solutions. However the semi-solid forming of steels reveals high potential to reduce material as well as energy consumption compared to conventional process technologies, such as casting and forging. Simulation techniques exhibit a great potential to acquire a good understanding of the semi-solid material process. Therefore, this work deals with the development of an appropriate constitutive model for semi-solid thixoforming of steel. The constitutive law should be able to simulate the complex rheology of semi-solid materials, under both steady-state and transient conditions. For example, the peak of viscosity at start of a fast loading should be reproduced. The use of a nite yield stress is appropriate because a vertical billet does not collapse under its own weight unless the liquid fraction is too high. Furthermore, this choice along with a non-rigid solid formalism allows predicting the residual stresses after cooling down to room temperature. Several one-phase material modeling have been proposed and are compared. Thermomechanical modeling using a thermo-elasto-viscoplastic constitutive law has been developed. The basic idea is to extend the classical isotropic hardening and viscosity laws to the non solid state by considering two non-dimensional internal parameters. The rst internal parameter is the liquid fraction and depends on the temperature only. The second one is a structural parameter that characterizes the degree of structural build up in the microstructure. Those internal parameters can depend on each other. The internal parameters act on the the viscosity law and on the yield surface evolution law. Di erent formulations of viscosity and hardening laws have been proposed and are compared to each other. In all cases, the semi-solid state is treated as a particular case, and the constitutive modeling remains valid over the whole range of temperature, starting from room temperature to above the liquidus. These models are tested and illustrated by mean of several representative numerical applications.

2nd International Conference on Rheology and Modeling of Materials (IC-RMM2)

Mechanical Behaviors of Copolymer Elastomers: Experimental Characterization and Constitutive Modelling

Special Issue – 12th International Conference on Electrorheological Fluids and Magnetorheological Suspensions – Part 1

Rheological Study of Microstructures and Properties for Polymeric Materials

Rheological In-Mold Measurements and Characterizations of Sheet-Molding-Compound (SMC) Formulations with Different Constitution Properties by Using a Compressible Shell Model

Simulation-based High-Speed Elongational Rheometer for Carreau-type Materials

Recent Advances in Mechanical Engineering

Scientific Machine Learning for Modeling and Simulating Complex Fluids

Semi-solid constitutive modeling for the numerical simulation of thixoforming processes.

Rheology and Processing of Polymeric Materials: Volume 1: Polymer Rheology

Modeling linear and nonlinear rheology of industrial incompatible polymer blends

Nondestructive Characterization of Materials II

Constitutive modeling of the magnetic-dependent nonlinear dynamic behavior of isotropic magnetorheological elastomers

Nonmonotonic Relaxation as a Result of Spatial Heterogeneity in the Model of In-series Blocks Chain

Modeling of Texture Development during Metal Forming Using Finite Element Visco-Plastic Self-Consistent Model

Towards a thermo-magneto-mechanical coupling framework for magneto-rheological elastomers

Correlation Between Rheological Behavior and Structure of Multi-Component Polymer Systems

Experimental Study and Mathematical Modeling of Magnetorheological Elastomers Considering Molecular Chain Network and Temperature Influence

Structural Rheology in the Development and Study of Complex Polymer Materials

Mechanics of Materials: Multiscale Design of Advanced Materials and Structures

Nonlinear mathematical modeling of frequency-temperature dependent viscoelastic materials for tire applications