Abstract:The antiwear properties of tribofilms formed on steel surfaces lubricated with various multi-component lubricants were investigated at an elevated temperature and under load-speed conditions conducive to sliding in the boundary lubrication regime. The lubricants contained base oil, reduced-level (secondary) zinc dialkyl dithiophosphate (ZDDP), and nitrogenous dispersant. The wear resistance of the tribofilms produced from different oil blends was evaluated in the context of the rate of change in the sliding track volume (wear rate for material loss) and the load-bearing capacity, chemical composition, and thickness of the tribofilms. Surface profilometry and scanning electron microscopy were used to quantify the wear performance and detect the prevailing wear mechanisms, whereas X-ray photoelectron spectroscopy elucidated the chemical composition and thickness of the tribofilms. The oil blends without ZDDP did not produce tribofilms with adequate antiwear properties, whereas the oil blends containing ZDDP and dispersant generated tribofilms with antiwear characteristics comparable to those of tribofilms produced from blends with a higher ZDDP content. Although dispersants can suspend oil contaminants and preserve the cleanness of the sliding surfaces, it was found that they can also reduce the antiwear efficacy of ZDDP. This was attributed to an additive-dispersant antagonistic behavior for surface adsorption sites affecting tribofilm chemistry and mechanical properties. Among the blends containing a mixture of ZDDP and dispersant, the best antiwear properties were demonstrated by the tribofilm produced from the blend consisting of base oil, 0.05 wt% ZDDP, and a bis-succinimide dispersant treated with ethylene carbonate. The findings of this investigation demonstrate the potential of multi-component lubricants with reduced-content ZDDP and nitrogen-based dispersant to form effective antiwear tribofilms.

Elucidation of the Action of Functional Groups in the Coexisting Ashless Compounds on the Tribofilm Formation and Friction Characteristic of Zinc Dialkyldithiophosphate-Formulated Lubricating Oils

Competitive Molecular Interaction between Zinc Dialkydithiophosphate (ZDDP) and Methyl Oleate along Boundary Lubrication Regime

Zinc dialkyldithiophosphates adsorption and dissociation on ferrous substrates: an ab initio study

The Synergistic Antiwear and Frictional Properties of Organic Molybdenum Compound with Zinc Dialkyldithiophosphate

Wear Mechanisms, Composition and Thickness of Antiwear Tribofilms Formed from Multi-Component Lubricants

Mechanical properties of tribofilms formed by metal dithiodiphosphates

Effects of End Groups on the Tribochemical Reactions of Lubricants at Head-Disk Interface

The impact of organic friction modifiers on engine oil tribofilms

Antiwear Chemistry of ZDDP: Coupling Classical MD and Tight-Binding Quantum Chemical MD Methods (TB-QCMD)

Synergistic Effects of MoDTC and ZDTP on Frictional Behaviour of Tribofilms at the Nanometer Scale

Study on performance of 2,5-dimercapto-1,3,4-thiadiazole (DMTD) derivative as a multifunctional lubricant additive

Effect of functional groups on tribological properties of lubricants and mechanism investigation

ZDDP Tribofilm Formation and Removal

Film Formation of Non-Phosphorus Wear Inhibitors

A study of S-(1H-benzotriazol-1-yl)methyl N,N-dialkyldithiocarbamates as novel multifunctional oil additives

Preparation and Tribological Study of Novel Amide-based Organic Friction Modifiers

Ionothermal Synthesis Of Layered Zirconium Phosphates And Their Tribological Properties In Mineral Oil

Voltage-Assisted Tribofilm Formation of Sulfur- and Phosphorus-Free Organic Molybdenum Additive on Bearing Steel Surfaces in Industrial Base Oils

Tribological behavior of sulfonitrided tribofilm generated from non-corrosive dimercaptobenzothiadiazole-based additives as effective boundary lubrication layer

Surface-functionalized nanoMOFs in oil for friction and wear reduction and antioxidation

Dynamics of Tribofilm Formation in Boundary Lubrication Investigated Using In Situ Measurements of the Friction Force and Contact Voltage