Abstract:Utilization of sintered red mud to optimize the extraction of Al2O3 and the preparation of PAFS water purification agents is reported. The proposed process achieves a significant reduction in red mud volume, maximizes the separation efficiency of Al2O3, and converts residual aluminum and iron elements water treatment agents. The process parameters for comprehensive utilization are thoroughly investigated, along with evaluating the efficacy of fabricated PAFS materials. By employing an "alkali calcination‐water leaching" integrated extraction technique, the separation of aluminum and iron components in red mud is achieved through the extraction of aluminum oxide and the preparation of polymeric aluminum iron sulfate (PAFS) water treatment agent. Basic characteristics of raw material red mud were characterized. The process parameters of activation calcination, leaching, and preparation of water treatment agent were determined. The prepared PAFS was characterized in terms of its fundamental properties and waste water treatment capacity. Results showed that the content of Al2O3 and Fe2O3 in red mud was 12.98 % and 6.09 %, respectively, distributed in the amorphous phase, while SiO2 and CaO existed in form of feldspar, calcite, and calcium silicate. During calcination stage, use NaOH as the activation medium, over 43 % Al2O3 could be extracted under the optimal activation and leaching process parameters. After acid leaching of the water‐leached residue, PAFS water treatment agent was prepared by utilizing the resultant acid leaching solution with NaOH as PH regulator. By optimizing the process parameters for preparation, an impressive turbidity removal rate of 97.52 % was achieved for the resulting PAFS. This study presents a viable approach for achieving significant reduction and maximizing the value‐added utilization of red mud.

Preparation and performance of ceramic filter material by recovered silicon dioxide as major leached component from red mud

Fabrication and characterization of silicon carbide ceramic filtration media via recycling of waste red mud

Extraction of Aluminum and Preparation of Polymerized Aluminum Ferric Sulfate from Red Mud

Selective extraction of sodium from red mud by dry digestion

Red mud with enhanced dealkalization performance by supercritical water technology for efficient SO 2 capture

Novel Method for High-Performance Simultaneous Removal of NOx and SO2 by Coupling Yellow Phosphorus Emulsion with Red Mud

Material properties and environmental implications of red mud solidified with blast-furnace slag, silica fume, and sodium hydroxide

Leaching Kinetics and Reactivity Regulation of Red Mud in an NaOH Solution

Preparation and Application of Polyaluminum Ferric Sulfate from Red Mud: Behaviors of Leaching, Polymerizing, and Coagulation

Stepwise extraction of valuable components from red mud based on reductive roasting with sodium salts

Preparation and application of microfiltration porous coal gangue–loess‐based ceramic membrane

Sustainable application of sodium removal from red mud: Cleaner production of silicon-potassium compound fertilizer

Improving foamed mixture lightweight soil containing red mud properties by utilizing nano-SiO2

Study on preparation and performance of iron tailings-based porous ceramsite filter materials for water treatment

Preparation and enhanced mechanical properties of novel Al2O3‐C ceramic filter reinforced by microporous powder and SiC whiskers

In-situ preparation of porous metal-ceramic composite from secondary aluminum dross and red mud for adsorption of organic pollutant

Preparation of ultra-lightweight ceramsite from red mud and immobilization of hazardous elements

Study on using red mud to control phosphorus release in sediment

Purification of Low-Concentration Carbonyl Sulfide by Red Mud-Based Adsorbent

Lower-temperature preparation of SiC ceramic membrane using zeolite residue as sintering aid for oil-in-water separation

Synergistic desulfurization performance of industrial waste red Mud: A comprehensive experimental and computational study for COS removal and CO(g) production