Abstract:Antimony (Sb), arsenic (As), and lead (Pb) are toxic metal(loid)s that can cause serious environmental pollution. The above emphasizes the need for a development of efficient technologies for metal(loid) removal, especially from low-pH environments due to the increased mobility of the contaminants under acidic conditions. Herein, for the first time, removal of Sb(V/III), As(V/III), and Pb(II) from acidic waters is described, using low-cost adsorbents synthesized from red mud (RM; a solid waste from the alumina industry) under the catalysis by acid mine drainage (AMD; acidic effluents from mines). The reactions between RM and AMD were studied to describe Fe/S/Ca/Al/Si speciation transformations during the adsorbent formation. In addition, Sb/As/Pb adsorption behavior and the relationship between adsorbent properties and Sb/As/Pb removal efficiencies were investigated. The maximum removal capacities for Sb(V), Sb(III), As(V), As(III), and Pb(II) reaching 1,637.8, 80.2, 109.2, 16.4, and 518.7 mg/g, respectively. The primarily Ca 2+ from the Ca-bearing compounds (determined in RA2, synthesized under S RM /L AMD 2:1) contributed to Sb(V) removal ( via precipitation of CaSb 2 O 5 (OH) 2 and formation of Sb-bearing precipitate, with silicate gel nanospheres securing high stability of the immobilized Sb). In the As immobilization process, Fe(III) (hydr)oxides (formed in RA4, synthesized under S RM /L AMD 4:1) such as goethite (α-FeOOH) and bernalite (Fe(OH) 3 ) played a dominant role. Convertible sulfates (e.g., CaSO 4 and Al 2 (SO 4 ) 3 ) in RA10 (synthesized under S RM /L AMD 10:1) ensured a high removal capacity for Pb(II) across a wide pH range (2 to 7) via PbSO 4 precipitation. In contrast, the formation of PbCO 3 and Pb 3 (CO 3 ) 2 (OH) 2 was the main mechanism for Pb(II) removal by unamended RM at pH 5.0, while no contaminant removal capacity was observed at pH 2.0.

Purification of Low-Concentration Carbonyl Sulfide by Red Mud-Based Adsorbent

Synergistic desulfurization performance of industrial waste red Mud: A comprehensive experimental and computational study for COS removal and CO(g) production

Novel Method for High-Performance Simultaneous Removal of NOx and SO2 by Coupling Yellow Phosphorus Emulsion with Red Mud

Red mud with enhanced dealkalization performance by supercritical water technology for efficient SO 2 capture

Reaction characteristics of CO2 captured by red mud

Preparation of a Low-Cost Adsorption Material from Red Mud and Bagasse

Removal of methylene blue from coloured effluents by adsorption onto SBA-15

Preparation and performance of ceramic filter material by recovered silicon dioxide as major leached component from red mud

Novel adsorbent synthesized from red mud and acid mine drainage for enhanced contaminant removal: Industrial waste transformation, adsorbent performance and metal(loid) removal mechanisms

Synergistic Promotion for CO2 Absorption and Solvent Regeneration by Fine Waste Red Mud Particles on in Amine-Based Carbon Capture: Performance and Mechanism

Enhanced sequestration of CO2 from simulated electrolytic aluminum flue gas by modified red mud

Deep removal of COS by carbon aerogel in natural gas: A 3D network structure of nitrogen doped and Cu based adsorbent

CuY@NiAl-Layered double oxides bi-functional composites for "Catalytic–Adsorptive" removal of carbonyl sulfide

Research progress of carbonyl sulfide removal from blast furnace gas by porous materials

Hydrothermal chemical modification of red mud for efficient adsorption of methylene blue

Biomass-derived carbon/iron composite (FexOy-BC (RM)) with excellent Cd(II) adsorption from wastewater – Red mud resource utilization

A comprehensive investigation of the adsorption behaviour and mechanism of industrial waste sintering and bayer red muds for heavy metals

Staged characteristics of red mud dealkalization by CO2 and SO2

Capture of Carbon Dioxide with Red Mud

Catalysts of Ordered Mesoporous Alumina with a Large Pore Size for Low-Temperature Hydrolysis of Carbonyl Sulfide

An Experimental Study on SO2 Emission and Ash Deposition Characteristics of High Alkali Red Mud under Large Proportional Co-Combustion Conditions in Fluidized Bed