Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Equation‐oriented simulation and optimization of process flowsheets incorporating detailed spiral‐wound multistream heat exchanger models

Thermal Design of Large Plate-Fin Heat Exchanger for Cryogenic Air Separation Unit Based on Multiple Dynamic Equilibriums

Equation-Oriented Modeling Of Multi-Stream Heat Exchanger In Air Separation Units

Globally Optimal Design of Intensified Shell and Tube Heat Exchangers Using Complete Set Trimming

New Transshipment Type MINLP Model for Heat Exchanger Network Synthesis

A Framework for Multi-Objective Optimization of Plate-Fin Heat Exchangers Using a Detailed Three-Dimensional Simulation Model

Systematic Optimization Methodology for Simultaneous Process Design and Heat Exchanger Network Synthesis with Surrogate Models – Application to Distillation Column Complex

Passage arrangement design for multi-stream plate-fin heat exchanger under multiple operating conditions

Effect of Inlet Flow Maldistribution on the Passage Arrangement Design of Multi-Stream Plate-Fin Heat Exchanger

Optimal heat exchanger network synthesis with the detailed heat transfer equipment design

A New Computer-Aided Optimization-Based Method for the Design of Single Multi-Pass Plate Heat Exchangers

An efficient thermo-hydraulic model for the investigation of a plate-fin heat exchanger in a single mixed refrigerant process

An isogeometric analysis-based topology optimization framework for 2D cross-flow heat exchangers with manufacturability constraints

Parametric optimization of a spiral ground heat exchanger by response surface methodology and multi-objective genetic algorithm

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Globally optimal simultaneous heat exchanger network synthesis and basic heat exchanger design

Design of heat exchanger network physical layout in process plants using a mixed-integer model

Flow pattern analysis and multi-objective optimization of helically corrugated tubes used in the intermediate heat exchanger for nuclear hydrogen production

Mathematical programming model for heat exchanger design through optimization of partial objectives

Multi-objective optimization of a double helical coil heat exchanger using response surface method and genetic algorithm

Optimization of thermal and flow characteristics of plate heat exchanger with variable structure parameter