Abstract:The weathering of acrylic films and acrylic-coated lime wood (Tillia cordata Mill.) were examined using Fourier transform infrared (FT-IR) and two-dimensional infrared correlation spectroscopy. The obtained results showed chemical changes induced by exposure to weathering conditions, in both films and coated wood. The observed spectral changes of the acrylic films refer to the absorption band assigned to the C-O stretching, which progressively decreases with increasing exposure time. In the spectra of treated wood samples the main signal indicating the advance of oxidation during the photodegradation exposure is the gradual increase and broadening of the band in the carbonyl region. This is due to the formation of the non-hydrogen bonded aliphatic carboxylic acids and γ-lactone structures in the acrylic resin and of the nonconjugated ketones, carboxyl groups, and lactones in wood. As a consequence, the increase of the 1734 cm(-1) band is due to the degradation of lignin from wood surface. These observations are also supported by the decreased intensities of the bands at 1598 and 1505 cm(-1), assigned to C=C of aromatic skeletal (lignin). The relative intensity of the characteristic aromatic lignin band at 1505 cm(-1) decreases up to 25% of its original value after weathering, being less than half of the value obtained for uncoated wood. Two-dimensional infrared (2D IR) correlation spectroscopy was used to identify the sequence of the modifications of the different stretching vibrations bands under the weathering conditions, the method allowing the prediction of the order of degradation reactions. The acrylic resin degradation starts with the formation of radicals by abstraction of the tertiary hydrogen atoms of the methyl acrylate units and the α-CH3 groups from the ethyl methacrylate units. The subsequent decomposition and oxidation led to the formation of alcohol groups, hydroperoxides, ketones, and/or carboxylic acid groups. The 2D IR correlation spectra of weathered impregnated wood also revealed the elimination of low molecular weight compounds following the degradation of lignin and carbohydrates components from wood.

Applying the Protective Role of Condensed Tannins to Acrylic-based Surface Coatings Exposed to Accelerated Weathering

Synthesis of acrylated tannic acid as bio-based adhesion promoter in UV-curable coating with improved corrosion resistance

The Synergistic Effects of Sio2 Nanoparticles and Organic Photostabilizers for Enhanced Weathering Resistance of Acrylic Polyurethane Coating

Exploitation of tannic acid as additive for the adhesion enhancement of UV-curable bio-based coating

Influence of nanoparticles and olive leaf extract in polyacrylate coating on the weathering performance of thermally modified wood

Study on Siloxane-Acrylic Aqueous Dispersions for Use in Exterior Decorative Coatings

Effects of Active Diluents on Solidifying Process of UV-curing Reaction for Polyurethane Acrylate

Weathering performance of thermally modified wood coated with polyacrylate containing olive leaf extract as a bio-based additive

Modification of styrene-acrylic emulsion by organic UV absorber in synergy with fluorine and silicon monomers for weatherable coatings

The Effect of Polyacrylate Emulsion Coating with Unmodified and Modified Nano-TiO2 on Weathering Resistance of Untreated and Heat-Treated Wood

Enhancing Permanence of Corrosion Inhibitors Within Acrylic Protective Coatings for Outdoor Bronze Using Green Nanocontainers

Surface Characteristics and Artificial Weathering Resistance of Oil-Based Coatings on the Chemically and Thermally Modified Short-Rotation Teak Wood

Structural study of photodegraded acrylic-coated lime wood using Fourier transform infrared and two-dimensional infrared correlation spectroscopy

Reactive UV-absorber and epoxy functionalized soybean oil for enhanced UV-protection of clear coated wood

STUDY ON ADSORPTION OF TANNIC AND GALLIC ACIDS USING ACRYLIC ESTER RESINS

Tannin-based wood adhesive with good water resistance crosslinked by hexanediamine

Preparation of tannic acid-reinforced cellulose nanofiber composites for all-water-based high-performance wood adhesives

Skin Development during the Film Formation of Waterborne Acrylic Pressure-Sensitive Adhesives Containing Tackifying Resin

Preparation and Properties of Thermosetting Acrylic Coatings Using Titanium-Oxo-Cluster As A Curing Agent

Acrylic-fluoropolymer mixtures and their use in coatings

Weath ering Performance of Beech Wood Coated with Acrylic Paint Containing UV Stabilizers of Dihydroxy Benzophenone and Nano Zinc Oxide