Abstract:Commercial cured poly(phenylene sulfide) (PPS) is produced by the thermal oxidation treatment of linear PPS in the solid state. Branching and oxidation reactions occur, and correspondingly, the crystallization behaviors of PPS change a lot. A linear pristine PPS and its acid-treated control PPS were carefully designed in this work, and crystallization behaviors of samples with different cure times were systematically investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). It was found that although primary nucleation density increases with cure time for both groups, T c showed a decreasing trend for cured acid-treated PPS while an increasing trend for cured pristine PPS. The isothermal crystallization kinetics were quantitatively characterized based on the Avrami equation and Lauritzen–Hoffman secondary nucleation theory. It was shown that the spherulite growth dimension decreases with cure time and the growth rate decreases contrary to the rising secondary nucleation rate. The competitive results between increasing primary nucleation density and decreasing growth rate gave different isothermal crystallization rate versus cure time patterns for these two groups. Specifically, for cured acid-treated PPS, the crystallization rate first decreased, then increased, and finally decreased again, which is different from previous reports. Besides, the spherulites became gradually more irregular along with the growing nucleation density. We also found that enhanced melt memory accounts for the increasing nucleation density. It is proposed that lamellar crystals are cross-linked by curing reactions, making them more difficult to melt or fully relaxed. Thus, more local ordered structures are formed in premelting, which behave as nucleation sites.

New Evaluation Methods of Average Molecular Weight and the Degree of Branching of Poly(1,4-phenylene sulfide) Samples through Their Partial Sulfonation

Effect of Solvent Composition on the Sulfonation Degree of Poly(Phenylene Oxide) (Ppo)

A New Insight into the Reaction Mechanism in Preparation of Poly(phenylene Sulfide)

A Novel Synthetic Method for Preparing Poly(2,6-Dimethyl-1,4-phenylene Oxide)/polystyrene Alloy in Reactor Containing Aqueous Medium

Effect of Aminated Polyphenylene Sulfide on the Mechanical Properties of Short Carbon Fiber Reinforced Polyphenylene Sulfide Composites

Comparative Study on Novel Poly(alkylene Sulfide)s with Modulated Thioether Linkages and Flexible Alkylene Spacers

Sulfonation of poly(ether ether ketone): An evidence for di-substitution of the repeat unit

Solid Cure of Poly(phenylene sulfide): Competition between Increasing Nucleation Density and Decreasing Growth Rate

Sulfonation of polarized styrene-butadiene-styrene triblock copolymers and preparation of its nanocomposites

Investigation on thermal degradation mechanism of poly(phenylene sulfide)

Influence of the Degree of Sulfonation on the Structure and Dynamics of Sulfonated Polystyrene Copolymers

Diverse Side-Chain Transformation of High Refractive Index Methylthio-Substituted Poly(phenylene sulfide)s

Polymer Electrolyte Membranes Derived from New Sulfone Monomers with Pendent Sulfonic Acid Groups

Effect of sulfonation degree on molecular weight, thermal stability, and proton conductivity of poly(arylene ether sulfone)s membrane

Sodium sulfide-based polysulfide polymers: synthesis, cure, thermal and mechanical properties

Recent Advancements in Polyphenylsulfone Membrane Modification Methods for Separation Applications

Mechanism and kinetics of poly(ether ether ketone) (PEEK) sulfonation in concentrated sulfuric acid at room temperature. Part 1. Qualitative comparison between polymer and monomer model compound sulfonation

Improving carbon fibre reinforced polyphenylene sulfide using amine and phenolic interphase modifications

Preparation of Poly(bis(phenoxy)phosphazene) and (31)P NMR Analysis of Its Structural Defects Under Various Synthesis Conditions.

Overall Investigation of Poly (Phenylene Sulfide) from Synthesis and Process to Applications—A Review

Bromination of Polystyrenes and Their Blends with Polybutylene Terephthalate