Abstract:High Performance Polymers, Ahead of Print. To achieve increased flow and reduce fouling, polymeric membranes can be functionalized with hydrophilic groups such as sulfone, amines, and others. This research has aimed at the sulfonation of Polysulfone (PSU) with various agents and at varying substitution degrees to change its hydrophobic character. PSU was also blended with Poly(lactic acid) (PLA), which is a more hydrophilic polymer. The phase inversion method was used to make PSU, PLA, sulfonated PSU, and PSU/PLA blend-based membranes. Sulfonation degrees of sulfonated PSU membranes were assessed using FT-IR, mechanical characteristics of membranes were determined, and thermal properties of membranes were clarified using DSC and TGA techniques. Hydrophilic natures and membrane alterations were investigated, as well as contact angle and water uptake measures. Among three distinct sulfonation agents (trimethylsilyl chlorosulfonate (TMSCS), sulfuric acid, and chlorosulfonic acid) employed to produce a 20% sulfonation degree of polysulfone, TMSCS was chosen as having the highest sulfonation efficiency (91.5%). With increasing sulfonation degree, a drop in molecular weight was seen in all sulfonated polysulfone samples. The mechanical strength values of polysulfone after sulfonation with TMSCS rose from 35.23 MPa to 63.35 MPa, while the contact angle value decreased from 85.58° to 71°. The contact angle value reduced from 85.58° to 64.68° while the mechanical strength of the PSU and PSU/PLA (50:50) blend increased from 35.23 MPa to 39.3 MPa. Membranes were also tested for pure water flux, hydrostability, and biostability. In terms of application requirements, it was determined that sulfonated PSU-based membranes manufactured with TMSCS with a 20% sulfonation degree and PSU/PLA blend-based membranes with a 50:50 (w:w) ratio have the optimum compositions with high flux quantities.

Effect of Solvent Composition on the Sulfonation Degree of Poly(Phenylene Oxide) (Ppo)

The Effect of Ligand Molecular Weight on Copper Salt Catalyzed Oxidative Coupling Polymerization of 2,6‐Dimethylphenol

Comprehensive studies on sulfonated octaphenyl polyhedral silsesquioxane (SPOSS) using sulfuric acid: Structural analysis and composite crosslinked SPPSU/SPOSS membranes

Synthesis and Characterization of Α,ω-Bis(2,6-dimethylphenol)-poly(2,6-dimethyl-1,4-phenylene Oxide) Oligomers in Water and the End-Group Modification

OXIDATIVE POLYMERIZATION BEHAVIOR OF 2,6-DIMETHYLPHENOL IN AQUEOUS MEDIA WITH POTASSIUM FERRICYANIDE

Synthesis and Characterization of Low‐molecular‐weight Poly(2,6‐dimethyl‐1,4‐phenylene Oxide) in Water

Polymerization of 2,6-Dimethylphenol by Oxidative Coupling Mechanism in Aqueous Medium

Effect of Swelling Agent on the Molecular Weight of Poly(2,6‐dimethyl‐1,4‐phenylene Oxide) Synthesized in an Aqueous Medium

New Evaluation Methods of Average Molecular Weight and the Degree of Branching of Poly(1,4-phenylene sulfide) Samples through Their Partial Sulfonation

Influences of Solution Property and Charge Density on the Self-Assembly Behavior of Water-Insoluble Polyelectrolyte Sulfonated Poly(sulphone) Sodium Salts.

A Novel Synthetic Method for Preparing Poly(2,6-Dimethyl-1,4-phenylene Oxide)/polystyrene Alloy in Reactor Containing Aqueous Medium

Solubilities of Sulfuryl Fluoride in Propylene Carbonate, Tributyl Phosphate and N-methylpyrrolidone

Fundamental studies of homogeneous cation exchange membranes from poly(2,6-dimethyl-1,4-phenylene oxide): Membranes prepared by simultaneous aryl-sulfonation and aryl-bromination

Oxidative Coupling Copolymerization for Synthesis of Poly(Phenylene Oxide) Containing Allyl Groups in Water

Investigating the Impact of the Sulfonation Degree in Sulfonated Polyphenylsulfone (sPPSU) on PES/sPPSU Polymer Blend Membranes

Effect of sulfonation with concentrated sulfuric acid on the composition and carbonizability of LLDPE fibers

Preparation and Characterization of Poly(ethylene Glycol)-G-chitosan with Water- and Organosolubility

The Effect of Different Solvents on the Caracteristics of Sulfonated Poly (phthalazinone Ether Sulfone Keton) (Sppesk)

Effect of resin sulfonation on the retention of polar organic compounds in solid-phase extraction

Synthesis and Properties of Side-Chain-Type Sulfonated Poly(Phenylene Oxide) for Proton Exchange Membranes

Hydrophilicity and flux properties improvement of high performance polysulfone membranes via sulfonation and blending with Poly(lactic acid)