Abstract:The N-doped carbon material is one of the most efficient adsorption materials in the field of carbon capture. Although many N-doped carbon materials have been prepared for CO2 adsorption in recent years, the promotion mechanism of N-doping has not been clearly proposed. In this study, a series of N-doped biochars were suc-cessfully prepared by a facile solvent-free method. Among them, the biochar prepared with corncob powder, K2CO3 and urea at 800 degrees C showed the highest adsorption capacity (5.69 mmol/g at 0 degrees C and 1 bar) and selectivity (38.24 at CO2/N2 = 10/90). The biochar also exhibited excellent thermal stability and cycle performance. Notable, correlation analysis showed that ultra-micropores were the decisive factor for CO2 adsorption at low temperatures; nevertheless, the effect of N-doping would gradually appear with the increase of adsorption temperature. By fitting the kinetics of CO2 adsorption, it was found experimentally that N-doping could increase the activation energy between biochar and CO2. Next, through constructing biochar models with different ni-trogen contents and different N-doping forms, it was found from theoretical calculation that N-doping could increase the adsorption energy between CO2 and biochar. Further theoretical analysis found that N-doping mainly enhanced the dispersion interaction between the biochar surface and CO2 to improve the adsorption performance, and the higher the nitrogen content, the more obvious the improvement. This work not only prepared a N-doped biochar with excellent CO2 adsorption performance from waste biomass, but also revealed the promotion mechanism of N-doping in detail by combining theoretical calculations with experiments.

Preparation of K-N co-doped commercial cylindrical carbon via the coal partial steam gasification for CO2 adsorption

An Efficient Biochar Adsorbent for CO2 Capture: Combined Experimental and Theoretical Study on the Promotion Mechanism of N-doping

Preparation of N, S Co-Doped Carbon Nanotubes Composites by Coal Pyrolysis for the CO2 Capture

N-doping Porous Carbon with Rich Narrow Micropores for Highly Efficient CO2 Selective Adsorption: Insight from Experimental and Theoretical Study

CO<sub>2</sub> Adsorption Performance of Activated Coke Prepared from Biomass and Coal

Facile preparation of N-doped porous carbon and its CO2 gas adsorption performance

Nitrogen-doped porous carbons derived from sustainable biomass via a facile post-treatment nitrogen doping strategy: Efficient CO2 capture and DRM

Conversion of coal into N-doped porous carbon for high-performance SO2 adsorption

Benzimidazole Precursor-Derived N-Doping Porous Carbon with High-Efficiency Co2 Selective Adsorption: Insight from Experimental and Theoretical Study

CO2 Adsorption Performance of Activated Coke Prepared from Biomass and Coal

A green trace K2CO3 induced catalytic activation strategy for developing coal-converted activated carbon as advanced candidate for CO2 adsorption and supercapacitors

CO2 Adsorption at Nitrogen-Doped Carbons Prepared by K2CO3 Activation of Urea-Modified Coconut Shell

One-Step Ammonia Activation of Zhundong Coal Generating Nitrogen-Doped Microporous Carbon for Gas Adsorption and Energy Storage

N-doped hierarchically porous carbons prepared with the assistance of chemical blowing and in-situ hard template as highly efficient CO 2 adsorbents: A combined experimental and theoretical study

One-pot synthesis of N-doped petroleum coke-based microporous carbon for high-performance CO2 adsorption and supercapacitors

Preparation of Nitrogen-Doped Cellulose-Based Porous Carbon and Its Carbon Dioxide Adsorption Properties

Enhanced N-doped Porous Carbon Derived from KOH-Activated Waste Wool: A Promising Material for Selective Adsorption of CO2/CH4 and CH4/N2

Tuning porosity of coal-derived activated carbons for CO2 adsorption

Nitrogen-Doped Ultrahigh Microporous Carbons Derived from Two Nitrogen-Containing Post-Cross-Linked Polymers for Efficient CO2 Capture

Synthesis and characterisation of K2CO3-activated carbon produced from distilled spent grains for the adsorption of CO2

Specific alkali metal sites as CO2 traps in activated carbon with different pore size for CO2 selective adsorption: GCMC and DFT simulations